Klüberfood NH1 94-6000 Grease for the food processing industries 25kg

Synthetic fluid gear grease for the food processing and pharmaceutical industries.Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener.Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-6000 can contribute to increase reliability of your production processes.We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Due to its special composition, Klüberfood NH1 94-6000 offers an unusual combination of performance characteristics. The special thickener provides very good wear protection even at the very soft consistency of NLGI 000. At the same time, Klüberfood NH1 94-6000 offers excellent corrosion protection along with good water resistance. This combination of special synthetic base materials enables optimum lubricant supply to the friction point also at low temperatures.Benefits for your application:Optimised lubricant supply to the friction point due to very soft consistency and good pumpability in central lubrication systemsReduced wear and extended maintenance intervals due to good load-carrying capacity and good corrosion protectionGood low-temperature characteristics enable use in refrigerated environmentsNSF-H1 registration for increased process reliabilityISO 21469 certified – supports the compliance with the hygienic requirements in your production plant.Application:Klüberfood NH1 94-6000 was especially developed for applications in machines and installations of the foodprocessing and pharmaceutical industries where incidental contact with your product cannot be excluded. Klüberfood NH1 94-6000 is used e.g. as a fluid gear grease for the immersion lubrication of toothed and worm gears or chains that run more smoothly with a soft grease.Application notes:Klüberfood NH1 94-6000 is applied by brush, spatula, grease gun, grease cartridge or via central lubrication systems. Before applying Klüberfood NH1 94-6000, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions for H1 lubrication.If the production process does not allow cleaning we recommend the existing grease be replaced by purging the system during relubrication.Overlubrication should generally be avoided.Product data: Article number 096115 NSF-H1 registration 143 372 Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, thickener calcium complex soap Lower service temperature -45 °C / -49 °F Upper service temperature 120 °C / 248 °F Color space brown Texture homogeneous Texture short-fibred Density at 20 °C approx. 0.88 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 435 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 475 x 0.1 mm NLGI grade, DIN 51818 000 Shear viscosity at 25 °C, shear rate 300 s-1, equipment:rotational viscometer <= 2 000 mPas Base oil viscosity at 40 °C, calculated value approx. 60 mm²/s Base oil viscosity at 100 °C, calculated value approx. 10 mm²/s Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 - 100 corrosion degree FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage >= 12 Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 – 90 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 12 months