Klüberplex BEM 34-131 N Speciality rolling bearing grease 25kg bucket

Klüberplex BEM 34-131 N Speciality rolling bearing grease | N° 017181In wind turbine generators, the lifetime of rolling bearings and service intervals can be extended with the right lubricant. Klüberplex BEM 34-131 N is a long-term lubricating grease offering high load-carrying capacity and very good corrosion protection. Also during downtime. Klüberplex BEM 34-131 N enables long grease life and is compatible with various lubrication systems.Benefits for your applicationIncreased reliability of wind turbine generators due to excellent corrosion protection, good resistance to weather and a wide service temperature rangeLonger service life of rolling bearings due to good wear protection, also under vibration and oscillationReliable operation due to good pumpability and metering via centralised lubrication systemsLow frictional resistance, reduced wear and component temperature due to excellent lubricityApplicationKlüberplex BEM 34-131 N is used for the lubrication of generator bearings in wind turbines. It can also be used for rolling bearings subject to oscillation, high loads and vibration. Klüberplex BEM 34-131 N is a grease for long-term or lifetime lubrication of different rolling bearing types and applications subject to various operating conditions. These may be found in: Hub units (wheel bearings in cars), shock absorber bearings, fans, electric motors, water pumps, paper-making machines (wet-processing zone), conveyors, universal joint bushes, linear guides and ball screws subject tomicro movement. Application notesKlüberplex BEM 34-131 N can be applied by means of brush, spatula, grease gun, grease metering gun, automatic lowquantity or standard metering systems, grease cartridge, and centralised lubrication systems. We recommend conducting a metering test in the original dosing device under practical operating conditions. Technical specifications Lubricating greases -K, DIN 51825 in connection with DIN 51502 KPHC1N-30L Chemical composition, type of oil mineral oil Chemical composition, type of oil synthetic hydrocarbon   oil Chemical composition, thickener calcium complex   soap Lower service temperature -35 °C / -31 °F Upper service temperature 150 °C / 302 °F Colour space yellow Density at 20 °C ca. 0,90 g/cm³  NLGI grade, DIN 51818 1 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C ca. 134 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C ca. 16 mm²/s Low-temperature torque, IP 186, -35 °C, running <= 100 mNm Low-temperature torque, IP 186, -35 °C, start <= 1 000 mNm Drop point, DIN ISO 2176, IP 396 >= 220 °C Flow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C  <= 1 400 mbar Speed factor (n x dm) ca. 1 000 000   mm/min Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000 min-1,   axial load: 1500 N, temperature: 150 °C, service life F50: >= 100 h Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original   container, approx.  36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com