Klüberplex BEM 41-132 STAR High-temperature long-term grease 120 ccm

Klüberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.Content: 120ccm cartridge suitable for Color: yellowAvailable as , , , 170kg barrelBenefits for your applicationLonger service life due to special wear additives for roller bearingsLess maintenanceVersatile grease due to wide operating temperature range and optimised oil releaseApplicationKlüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between 70 and 110 °C.For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings, cylinder roller bearings, spherical roller bearingsFor-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section), textile machines (dry section), electric motors, hot air blowers drying ovens, air separators in the base materials industry, generators in wind power plantsRolling bearings in vehicle componentsClutch bearingsGenerator bearingsWater pump bearingsFluid fan bearingsTechnical specifications Lubricating greases -K, DIN 51825 in connection with DIN 51502 KPHC2N-30L Chemical composition, thickener special lithium soap Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, type of oil mineral oil Lower service temperature -40 °C / -40 °F Upper service temperature 150 °C / 302 °F Color space yellow Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 120 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 14 mm²/s Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176, IP 396 >= 250 °C Speed factor (n x dm) approx. 1 000 000 mm/min Oil separation, DIN 51817 N, after 7 d/40 °C <= 4 % by weight Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000 min-1, axial load: 1500 N, temperature: 150 °C, service life F50: >= 100 h Low-temperature torque, IP 186, -40 °C, start <= 1 000 mNm Low-temperature torque, IP 186, -40 °C, running <= 200 mNm Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com