Klüberplex GE 11-680 Adhesive gear lubricant 1kg can

Klüberplex GE 11-680 Adhesive gear lubricant | N° 039060Klüberplex GE 11-680 is an adhesive lubricant with a mineral oil base and an aluminium complex soap thickener.It is resistant to high pressure and contains anti-wear additives, corrosion and oxidation inhibitors.Klüberplex GE 11-680 is free of bitumen, solvents and raw materials containing lead.Temperature range: 0°C to +140°C Volume: 1 kg canAlso available in: STAR 60cm³ cartridgeBenefits for your applicationAdhesive lubricantFree of raw materials containing lead or solventsResistant to high pressuresFZG scuffing load stage > 12Anticorrosion propertiesApplicable through automatic lubrication systemsApplicationsKlüberplex GE 11-680 is designed for the lubrication of open and closed spur and bevel gears, lifting spindles, slideways and guideways, large chain drives and sliding bearings.It is particularly suitable for elevated component temperatures and wherever adhesive lubricants containing solid lubricants should not be used.Application notesKlüberplex GE 11-680 should preferably be used for the lubrication of tooth flanks. It is applied to the gears through automatic spray systems. Smaller drives are also lubricated through positive drip-feed equipment, by brush or a hand spray equipment (e. g. with the Klübermatic LB spray gun). Splash lubrication is possible for components operating at low circumferential speeds (< 3 m/s).Technical specifications Chemical composition, thickener aluminium complex soap Chemical composition, type of oil mineral oil Lower service temperature 0 °C / 32 °F Upper service temperature 140 °C / 284 °F Colour space brown Texture very soft Density at 20 °C approx. 0.94 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value  380 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 420 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 685 mm²/sHazard Information (CLP)Signal word: Warning.Hazard statements (H-statements)H317 May cause an allergic skin reaction.Precautionary statements (P-statements)General:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.Prevention:P280 Wear protective gloves and protective clothing.P261 Avoid breathing mist / vapour / aerosol.P272 Contaminated work clothing should not be allowed out of the workplace.Response:P302+P352 IF ON SKIN: Wash with plenty of water and soap.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash it before reuse.Disposal:P501 Dispose of contents/container to an approved hazardous waste disposal site in accordance with local regulations. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com