Klübersynth MZ 4-17 Low-temperature corrosion protection oil 400ml

Klübersynth MZ 4-17 Lubricating and corrosion protection oil with good low-temperature properties | N° 047122Klübersynth MZ 4-17 is a fully synthetic lubricating and corrosion protection oil with good low-temperature properties. Apart from protecting against corrosion even when exposed to salt water, Klübersynth MZ 4-17 shows good antiwear properties.Volume: 400 ml aerosol canAlso available in: 1l can, 5l canister, 20l canister, 200l drumBenefits for your applicationNo residue formation or gumming due to fully synthetic product formulationHigher machine availability and less maintenance as the product supports smooth running at low temperatures, due to the good wear protection and due to good corrosion protection even when exposed to salt waterSafe application as the product is free from solventsApplicationKlübersynth MZ 4-17 has been designed for the preservation of rolling bearings prior to lubrication with synthetic lubricants. Furthermore, this product can be used as a corrosion protective agent on machines, installations and components in cold storage houses, aviation and navigation.This low-viscous, fully-synthetic oil improves smooth running of components and machine elements especially at low temperatures down to -50 °C. Klübersynth MZ 4- 17 has proven successful for the corrosion protection of tools, hunting and sporting weapons.Due to its good antiwear properties it can also be used as a lubricating oil. Klübersynth MZ 4-17 can also be used for the lubrication of longitudinal cutters in cardboard manufacture. Technical specifications Chemical composition, type of oil  ester oil  Lower service temperature  -50 °C Upper service temperature 150 °C Colour space  brown Appearance clear to slightly turbid  Density, DIN 51757, 20 °C ca. 0,86 g/cm³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40°C, lower limiting value 18 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40°C, upper limiting value 22 mm²/s Pour point, DIN ISO 3016  ca. -57 °C  Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 160 °C Hazard Information (CLP)Signal word: DangerHazard Statements (H-Sets)H222: Extremely flammable aerosol.H229: Pressurized container: May burst when heated.H304: May be fatal if swallowed and enters airways.Precautionary Statements (P-Sets)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.Response:P301 + P310: IF SWALLOWED: Immediately call Poison Center/Doctor.P331: Do NOT induce vomiting.Storage:P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.Additional LabelingEUH208: Contains benzenesulfonic acid, Di-C10-14-alkylderivatives, calcium salts; benzene, Mono-C10-14-alkylderivatives, fractionation residues, intermediates, sulfonated, sodium salts. May cause allergic reactions.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com