Klübertemp HM 83-402 High-temperature long-term lubrication grease 1kg

High-temperature long-term greasesKlübertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has beenspecifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klübertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.Content: 1kg canAvailable in 800g cartridge, 1kg can, 10kg bucketAdvantages for your applicationIncreased plant availability and reduced maintenance effortAt very high operating temperatures up to 260 ° CUnder the influence of aggressive chemicals and vaporsGood compatibility with most plastics and elastomersApplication areasKlübertemp HM greases are widely used in industries where the regular maintenance of lubrication points with standard temperatures of up to 260 ° C is indispensable. Klübertemp HM greases support the problem-free machine function in numerous industries and components, thanks to availability in three consistency classes. This allows an individual selection to meet the different requirements of a large number of applications optimally.Typical applications can be found in:ConveyorsCorrugated cardboard systemsPlastic technologyTextile industryPrinting industry and the likeKlübertemp HM greases are listed in maintenance and lubrication plans by leading manufacturers.Product dataChemical composition, type of oilPFPEChemical composition, solid lubricantPTFELower service temperature -30 °C / -22 °FUpper service temperature 260 °C / 500 °FColour spacewhiteDensity at 20 °Capprox. 1,96 g/cm³Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 420 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 40 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value7 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value13 000 mPasNLGI grade, DIN 518182Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeFlow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C <= 1 400 mbarFour-ball tester, welding load, DIN 51350 pt. 04 >= 8 000 NWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 – 90Minimum shelf life from the date of manufacture – in a dry, frost freeplace and in the unopened original container, approx. 60 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com