LOCTITE® 549 is an orange, medium strength, slow curing, thixotropic methacrylate gasketing product. It cures in the absence of air at room temperature when confined within close fitting metal parts to seal rigid metal faces and flanges. The viscosity is 20,000 mPas and service temperature -55°C to 150°C (-67°F to 302°F). Pack size: 50 ml tube (Loctite no. 230242)Available as well in tubeApplicationclose fitting joints between rigid metal faces and flangesas a formed-in-place gasket for pumps, thermostats, compressors, transmission housings and axle coversCharacteristicsroom-temperature curinginstant seal to low pressuresComposition: dimethacrylate esterColor: orangeContent: 250ml tube Technical Specification Chemical basis / base Methacrylate Color Orange Key characteristics Thixotropic Lab shear strength 3.6 N/mm² Recommended for use with Metal: aluminum, Metal: steel Viscosity, Brookfield – RVT, @ 25.0 °C Spindle 6, speed 20 rpm 10000.0 – 35000.0 mPa·s (cP) Hazard Information (CLP)Signal word: DangerHazard Statements (H-Sentences)H315: Causes skin irritation.H319: Causes serious eye irritation.H373: May cause organ damage through prolonged or repeated exposure.Precautionary Statements (P-Sentences)Prevention:P261: Do not breathe vapors, mist, or spray.P280: Wear protective gloves, eye protection, and face protection.P264: Wash affected area thoroughly after handling.Response:P302+P352: IF ON SKIN: Wash with plenty of water.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337+P313: If eye irritation persists: Get medical advice/attention.P332+P313: If skin irritation occurs: Get medical advice/attention.P362: Take off contaminated clothing.Storage and DisposalDispose of contents and/or container according to Federal, State/Provincial, and local governmental regulations. Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com
Loctite 549 Flange Sealant slow curing orange 50ml
0đ
Thông tin liên hệ
Công Nghiệp Hải Phòng đảm bảo 100% chất lượng của sản phẩm Loctite 549 Flange Sealant slow curing orange 50ml đúng như yêu cầu từ khách hàng và cung cấp đầy đủ MSDS, TDS, SDS, Invoice, mở tờ khai xuất khẩu cho từng sản phẩm. Nếu có nhu cầu mua sản phẩm hãy liên hệ đến Công Nghiệp Hải Phòng để nhận báo giá sớm nhất, chúng tôi sẽ hỗ trợ và tư vấn giúp bạn chọn được loại Loctite 549 Flange Sealant slow curing orange 50ml phù hợp.
Để được tư vấn và báo giá về sản phẩm, xin vui lòng liên hệ lại ngay với chúng tôi theo các thông tin sau:
☎️ Điện thoại: 0966068726 - 0933224021 (zalo)
📧 Email: [email protected]
🌐 Website: https://congnghiephaiphong.com
🗺️ Địa chỉ: Đường Lê Hồng Phong, Quận Ngô Quyền, T.P Hải Phòng, Việt Nam
Sản phẩm tương tự
Advesives & sealing compounds
Loctite 290 Wicking Grade Threadlocker medium-high strength green 10ml
Accessories for cartridges
Loctite 1034026 2-part applicator gun for 50ml S-50 cartridge
Accessories for cartridges
Advesives & sealing compounds
Delo-ML 5327 Heat-resistant metal bonding adhesive high force 50g
Accessories for cartridges
MATO EcoFILL 25 Standard Grease Gun Filler for 25KG Grease Bucket
Accessories for cartridges
Accessories for cartridges
Accessories for cartridges
Weicon Dispenser Easy-Mix D 50 for 50 ml Easy-Mix cartridges
Accessories for cartridges
SikaFast 74866 Dual cartridge manual applicator Type S 50ml, 1:10
Accessories for cartridges
Accessories for cartridges
Loctite EQ HD14 Dual cartridge manual applicator 200 ml, 1:1 & 1:2
Care & maintenance
Advesives & sealing compounds
3M Scotch-Weld EPX Hand application gun for 200 ml cartridges
Accessories for cartridges
Advesives & sealing compounds
Loctite 274 Threadlocker low viscosity medium strength blue 50ml
Accessories for cartridges
Loctite 96001 Dual cartridge manual applicator 50ml, 1:1 & 1:2
Advesives & sealing compounds
MIXPAC DM2X manual 2-component dispenser for 400 ml cartridges 1:1 2:1