Mobil Mobilith SHC PM 220 EP grease NLGI 1.5 for paper machines 16kg

Mobil Mobilith SHC PM 220 is a special Extreme Pressure (EP) grease KP HC 1-2 N -40 designed for severe paper machine applications, including extreme temperature environments and exposure to different qualities of water.Mobilith SHC PM 220 is an 1.5 NLGI Grade beige grease with a synthetic PAO base fluid (ISO VG 220). Its operating temperature range is between -40º C* and +150º C.Volume: 16 kg bucketAlso available in: 380 g cartridge, 174 kg barrelApplicationsMobilith SHC PM greases are recommended for critical rolling element bearing applications in paper machines, such as…Wet end paper machine bearingsHighly loaded press section bearingsHigh-temperature felt roll and calendar stack bearingsSpecifications & ApprovalsDIN 51825:2004-06 – KP HC 1-2 N -40 FeaturesWide application temperature range, from -40ºC to 150°C with excellent protection at high temperatures and low torque, easy start-up at low temperaturesReduced downtime and maintenance costs because of reduced wear, rust and corrosion even in acidic and alkaline water environmentsExtended service life with longer intervals between relubrication and improved bearing lifeOutstanding protection of slow speed, heavily loaded bearings, with extended bearing lifeRetains excellent grease performance in hostile aqueous environmentsHelps resist viscosity increase at high temperatures to maximize relubrication intervals and bearing lifeApplication NotesWhile Mobilith SHC PM greases are compatible with most mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobilith SHC PM greases, it should be thoroughly cleaned out to achieve the maximum performance benefits.Technical dataManufacturer Part Number148999PropertyPM 220GradeNLGI 1.5Thickener TypeLithium ComplexColor, VisualOff-WhiteCorrosion Preventive Properties, Rating, ASTM D1743PassDropping Point, °C, ASTM D2265275Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2596250Four-Ball Wear Test, Scar Diameter, mm, ASTM D22660.50Penetration, 60X, 0.1 mm, ASTM D217305SKF Emcor Rust Test, 10% Synthetic Sea Water, ASTM D61380.1SKF Emcor Rust Test, Acidic Water, ASTM D61380.1Timken OK Load, lb, ASTM D250965Viscosity @ 100 C, Base Oil, mm2/s, ASTM D44530.3Viscosity @ 40 C, Base Oil, mm2/s, ASTM D445220Viscosity Index, ASTM D2270179Water Washout, Loss @ 79 C, wt%, ASTM D12641Product description Mobilith SHC™ PMExxon Mobil Mobilith SHC™ PM greases are superior performance products designed specifically for severe paper machine applications, including extreme temperature environments and exposure to different qualities of water. Mobilith SHC PM greases combine the unique features of a synthetic base fluid with those of a high quality lithium complex thickener. The wax-free nature of the synthetic base fluid provides excellent low temperature pumpability and low starting and running torque compared to other non-synthetic oil products of the same viscosity. The high viscosity index of the synthetic base fluid ensures excellent film protection at high temperatures. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. These properties are complemented by a special additive system to provide rust and corrosion resistance, wear protection, thermal/oxidative resistance and to enhance water resistance properties. Mobilith SHC PM 220 and Mobilith SHC PM 460 are both NLGI grade 1.5 with base fluids of ISO VG 220 and 460, respectively.Mobilith SHC PM greases are designed for use in the most critical rolling element bearing applications in paper machines. They provide outstanding protection against rust and typical acid and alkali water corrosion, making them ideal for the wet end of the paper machine. The low volatility and excellent oxidation stability of the PAO base stock ensures excellent service at high temperatures typical of dry end conditions.The Mobilith SHC PM series has become the technology of choice for many paper mill operators, worldwide. Its reputation is based on exceptional quality, reliability and the proven performance benefits they deliver. Information on product safety (Manufacturer, Contact)EXXONMOBIL CENTRAL EUROPE HOLDING GMBH, Ericusspitze 2, 20457 Hamburg, GERMANY, +49 40 6393 0, , www.exxonmobil.de