Motorex GEAR COMPOUND PLUS ISO 220 High-pressure gear oil 5L canister

Motorex GEAR COMPOUND PLUS 220 is a mineral-based high performance gear oil (CLP, ISO VG 220). At high, abrupt loads, a protective oil film always remains between the force-transmitting surfaces.ApplicationThe oil is recommended for use in a number of spur gears, bevel gears and planetary gears produced by well-known manufacturers.The remarkable quality of this lubricant is particularly apparent when used under difficult conditions.It is therefore perfect for industrial gears used in gravel plants, mountain railways, industrial plants and sewage-treatment plants.Specifications & ApprovalsISO 12925-1ISO 6743-6 L-CKBISO 6743-6 L-CKCDIN 51517-3 CLPAGMA 9005/E02AIST 224 (U.S. STEEL)SEB 181226FLENDER, REV.14CharacteristicsExcellent corrosion protectionHigh level of wear protectionHigh micro-pitting resistanceCompatible with the majority of seal materials usedVery good demulsifying propertiesLow foaming tendencyExcellent shear stabilityHigh ageing and oxidation stabilityVolume: 5 l canisterAlso available in:  1 l canister, 20 l canister, 25 l canister, 12 X 1 l carton, 60 l drum, 200 l barrelTechnical specifications Manufacturer number   301083 Colour   brown  Density at 20 °C  g/cm³ ASTM D4052 0.895  Viscosity at 40 °C  mm²/s DIN 51562-1 220 Viscosity at 100 °C  mm²/s DIN 51562-1  18.9  Viscosity index  DIN ISO 2909 96 Pourpoint °C ASTM D5950 -24 Flash point C.O.C.  °C DIN EN ISO 2592 >200 Demulsifying capability / 54°C min.  DIN 51599  >60 FZG – test   DIN 51354-2 >12 micro pitting endurance test  FVA-54/II  GFT hoch micro pitting stage test   FVA-54/II  GFT hoch Copper corrosion  DIN EN ISO 2160  1 Steel corrosion  DIN ISO 7120 DIN 51585  0 TAN NZ mg KOH/g  ASTM D 664-95 DIN 51558-1 0.3 Information on product safety (Manufacturer, Contact)MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, , www.motorex.com