Klüber Summit PGS 100 Gas compressor oil 200L

Klüber Summit PGS 100 Synthetic gas compressor oils | N° 050028Klüber Summit PGS compressor oils are based on polyalkylene glycols and special additives.In high-pressure piston compressors for natural gas or hydrocarbon process gas, mineral oils are easily absorbed into, and diluted by, the gas stream.By contrast, Klüber Summit PGS compressor oils are extremely resistant to such effectsVolume: 200 l barrel Also available in: 20 l canister, 19 l bucketBenefits for your applicationFor the lubrication of piston, screw-type and rotary vane compressors for natural and process gasCompared with mineral oils, extremely resistant to dilution and absorption by hydrocarbon gasesKlüber Summit PGS-2 is ideal for heavy gases (densities > 1.5 g/cm³)AppliationsKlüber Summit PGS compressor oils are suitable for piston, screwtype and rotary vane compressors for natural or process gas.Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations. Application notesDrain as much of the old compressor oil from the system as possible, making sure that the oil is drained while still warm. Do not forget to drain coolers, separator tanks and all lines. Next, clean or preferably change the filters. Then recharge with the appropriate Klüber Summit PGS compressor oil. Technical specifications Article number 050028 Colour space yellow  Density, DIN 51757, 20°C approx. 1.05 g/cm³ Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 230 °C  Kinematic viscosity 100°C approx. 19.6 mm²/s Kinematic viscosity 40°C approx. 100 mm²/s Viscosity index, DIN ISO 2909 ≥ 200 Pour point, DIN ISO 3016  ≤ -39 °C Summit PGS100, Summit PGS-100  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com