3M 6057 Gas and Vapor Filter ABE1 for organic, inorganic & acid gases

3M® 6057 ABE1 gas filter is a high-quality filter for 3M half and full-face respiratory masks with a bayonet click connection.Protection AgainstA1: Organic gases and vapors (boiling point > 65 °C)B1: Inorganic gases and vaporsE1: Acid gases and vaporsFeaturesBayonet click connection for quick and secure filter installationCompact and lightweight for high comfortEffective adsorption using high-quality activated carbonCompatible with 3M mask series , , 7000, and 7500Available in various protection levels against gases, vapors, and particlesTechnical DataFilter TypeABE1WeightApprox. 200 gConnectionBayonet click connection for 3M masksStandardsPersonal Protective Equipment (PPE) Category IIIEN 14387:2004+A1:2008 – Gas filterMaterialsFilter housing: High-quality plasticFilter medium: Activated carbon granulesStorage and PackagingShelf life: 5 yearsReplace no later than 6 months after openingStorage temperature: -10 °C to +50 °CMaximum relative humidity: 70%Packaging: Packed in pairs (2 pcs), 4 pairs per box (8 pcs), 8 boxes per carton (32 pairs = 64 pcs)Overview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)A*Organic vapours (boiling point > 65 °C)General protection against solventsA1*Like A, with lower capacityWater-based paints, paints with residual solventsA2Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesB*Inorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideE*Acid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsKAmmonia and derivativesFertilizers, slurry, laboratory processesHgMercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in accordance with applicable regulations and standards. Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds