3M 6091 Gas and Particulate Filter A1P3 R

3M® 6091 A1P3 R gas and particulate filter is a high-quality combination filter for 3M half and full-face respiratory masks with a bayonet click connection.Protection AgainstA1: Organic gases and vapors (boiling point > 65 °C)P3: Solid and liquid particles, including hazardous dust, smoke and aerosolsFeaturesBayonet click connection for quick and secure filter installationCombined protection against gases, vapors, and particlesEfficient filtration using activated carbon and high-performance particle mediaCompatible with 3M mask series , , 6500, 7000 and 7500Suitable for applications involving organic solvents, dust and aerosolsTechnical DataFilter TypeA1P3 RWeightApprox. 260 g (per pair)ConnectionBayonet click connection for 3M masksStandardsPersonal Protective Equipment (PPE) Category IIIEN 14387:2004+A1:2008 – Gas and combination filterEN 143:2000+A1:2006 – Particle filterMaterialsFilter media: Activated carbon bonded fabric, filter paperHousing: Polypropylene, polystyreneStorage and PackagingShelf life: 5 years from manufacturing date (if unopened and properly stored)Replace no later than 6 months after openingStorage temperature: -20 °C to +25 °C (short-term up to +38 °C allowed)Maximum relative humidity: < 80%Packaging: Packed in pairs, 2 pairs per box (4 pieces), 8 boxes per carton (16 pairs = 32 pieces)Overview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3*For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)A*Organic vapours (boiling point > 65 °C)General protection against solventsA1*Like A, with lower capacityWater-based paints, paints with residual solventsA2Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesBInorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideEAcid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsKAmmonia and derivativesFertilizers, slurry, laboratory processesHgMercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in accordance with applicable regulations and standards. Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds