3M DT-4045E CF32 Combination filter A2B2E2K2 P3 R D

3M™ DT-4045E CF32 ABEK2P3 R D (formerly Scott Pro 2000 ABEK2P3) is a high-performance combination filter for DIN40 threaded respirators, offering broad protection against gases, vapours and particles.Protection againstA2: Organic gases and vapours with boiling point > 65 °C (e.g. solvents, toluene, xylene)B2: Inorganic gases and vapours (e.g. chlorine, hydrogen sulphide, hydrogen cyanide)E2: Acid gases and vapours (e.g. sulphur dioxide, hydrogen chloride)K2: Ammonia and organic ammonia derivativesP3 R D: Solid and liquid particles, toxic and radioactive substances, microorganisms (e.g. bacteria, viruses, enzymes)FeaturesDIN40 threaded connection (EN 148-1), compatible with RD40 masksCombination filter for wide-ranging protection in hazardous environmentsReusable (R), Dolomite-tested (D)Compatible with 3M full- and half-face masks and powered air respiratorsTypical uses: chemical industry, waste management, emergency response, nuclear3M Compatibility3M Respirators: FF-300, , Series (DIN40)Powered air system: 3M PF-602ETechnical DataFilter typeABEK2P3 R DWeightapprox. 377 gConnectionDIN40 thread (EN 148-1), compatible with RD40StandardsEN 14387 – Gas and combination filtersEN 12941 / EN 12942 – Powered air respiratorsPPE Category IIIMaterialsHousing: Reinforced polypropyleneFilter media: Micro glass fibre & activated carbonStorage and PackagingShelf life: 5 years from manufacturing date (if stored properly)Storage: dry, -10 °C to +50 °C, max. 75 % relative humidityAfter opening: store airtight or replace the filterOverview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3*For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)A*Organic vapours (boiling point > 65 °C)General protection against solventsA1*Like A, with lower capacityWater-based paints, paints with residual solventsA2*Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesB*Inorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideE*Acid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsK*Ammonia and derivativesFertilizers, slurry, laboratory processesHgMercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in accordance with applicable regulations and standards. Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds