Castrol Hyspin ZZ 10 Anti-wear hydraulic oil HLP 20L canister

Zinc-free anti-wear hydraulic oil HLP – ISO VG 10Castrol Hyspin ZZ 10 hydraulic oils are formulated without zinc containing additives, based on a carefully selected additive system, designed to meet and exceed the most exacting performance standards.ApplicationThe Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products.The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymersSpecifications / ApprovalsDIN 51524-2 – Requirements for HLP hydraulic oilsISO 6743/4 Requirements for HM hydraulic oilsHyspin AWS (for appropriate viscosity grade) is approved by:Parker Hannifin (Denison) HF0, HF1 & HF2Eaton E-FDGN-TB002-EHyspin AWS grades meet the requirements (for appropriate viscosity grade) of:DIN 51524 Part 2Fives Cincinnati P68, P69 & P70ASTM D6158 HMISO 11158 HMUS Steel 126GB 11118.1 L-HM (General and High Pressure)AdvantagesGood thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changesExcellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced downtime due to unscheduled maintenance and savings from replacement part costsExcellent filterability characteristic (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenanceExcellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliabilityTechnical specificationsISO Viscosity Grade: 10Density @ 15°C / 59°F kg/m³: 860Kinematic Viscosity @ 40°C / 104°F mm²/s: 10Kinematic Viscosity @ 100°C / 212°F mm²/s: 2.7Pour Point °C/°F: -33/-27Flash Point – open cup method °C/°F: 170/ 338Flash Point – closed cup method °C/°F: 145/ 293Size: 20 LiterPackaging type: canisterAlso available in: 208l barrelGLIS number: 1549F6MSDS number: 466978Hazard Information (CLP)Signal word: Danger.Hazard Statements (H-statements)H304: May be fatal if swallowed and enters airways.Precautionary Statements (P-statements)GeneralP102: Keep out of reach of children.P101: If medical advice is needed, have the product container or label at hand.PreventionNot applicable.ResponseP301 + P310, P331: IF SWALLOWED: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting.StorageP405: Store locked up.DisposalP501: Dispose of contents/container in accordance with local, regional, national, and international regulations.Hazardous IngredientsDistillates (petroleum), solvent-dewaxed light paraffinicAdditional InformationNot applicable. Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com