Castrol Molub-Alloy OG 3710-0/00 Open Gear Mill Lubricant 18kg bucket

Castrol Molub-Alloy OG 3710-0/00 Mill lubricant NLGI 0-00Castrol Molub-Alloy™OG 3710-0/00 (previously called Castrol Molub-Alloy 3710-0/00) is a heavy-duty lubricant formulated for open gear mill applications. It may be used in both raw and finish mill operations such as those found in coal, cement, copper and phosphate mills as well as in ball or rod mills. Formulated to address environmental concerns Castrol Molub-Alloy OG 3710-0/00 is free from lead, antimony, barium, bitumen and chlorinated solvents. The synthetic and petroleum oils used in Castrol Molub-Alloy OG 3710-0/00 are selected for their physical and chemical stability and for their exceptional serviceability over a wide temperature range. These fluids are compounded to flow readily in the film forming process, yet resist “squeeze out” and cling tenaciously even to gear teeth that mesh vertically. A proprietary blend of Castrol Molub-Alloy OG 3710-0/00 lubricating solids of selected grade and size distribution promote antiwear and load carrying properties beyond the capacity of conventional lubricants. The blend of synthetic and petroleum base fluids ensures excellent pumpability even at low temperatures. The high base oil viscosity assures sufficient film thickness at low speeds and high loads.ApplicationCastrol Molub-Alloy 3710-0/00 may be used from –30°C to +100°C. This is a general guideline and may be altered depending on application and conditions.Castrol Molub-Alloy 3710-0/00 is particularly suitable for service in the most severe conditions of dust as found in mill applications. It is designed to resist packing or hardening in the roots of gear teeth and in semienclosed gear cases.AdvantagesTechnical specificationsColor/appearance: Light, smoothBase thickener: LithiumBase oil base: Mineral oil, synthetic base oilSolid lubricants: YesNLGI consistency class: 0 to 00Base oil properties Kinematic viscosity at +40 °C mm²/s: 2100Viscosity index: 139Flash point °C: > +200Fulling penetration Pw 60 1/10mm: 380 to 410Volume: 18kg bucketAlso available as: 400ml spray can, 55kg barrel, 190kg barrelGLIS number: 1575BEMSDS code: 468749Castrol Molub-Alloy OG 3710 0/0Hazard Information (CLP)Hazard pictogram(s): Corrosion (eye damage symbol)Signal word: DangerHazard statements (H-phrases)H318 – Causes serious eye damage.Prevention (P-phrases)P280 – Wear eye or face protection.ResponseP305 + P351 + P338, P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.Storage and DisposalNot applicable (storage).Not applicable (disposal). Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com