Delo-ML 5327 Heat-resistant metal bonding adhesive high force 50g

DELO-ML® 5327 is a high-strength, anaerobically curing 1-component adhesive based on acrylate, designed for securing and sealing metallic threaded connections at temperatures up to +200 °C.Packaging: 50 g plastic bottleAlso available in: ApplicationsPermanent thread locking in machinery, engines, and housingsSealing of metallic threads in hydraulic, pneumatic, and piping systemsForm-fit bonding of shaft-hub connections (e.g., gears, bearings, bushings)Mounting of rotational components under high temperature and shear loadSecure bonding even on slightly oily metal surfaces (based on application testing)FeaturesHigh compressive and tensile shear strengthFast fixture time: 2–4 min (zinc-phosphated), 20 min (V2A with activator)Solvent-free, unfilled, RoHS- and VOC-compliantTemperature resistant up to +200 °CTechnical DataPhysical PropertiesChemical baseModified methacrylateColor (cured)GreenDensity1.1 g/cm³Viscosity300 mPa·sMechanical PropertiesBreakaway torque (stainless steel)50 N·mTensile shear strength (steel/steel)16 MPaCompressive shear strength (72 h at 23 °C)33 MPaThermal PropertiesTemperature resistance–60 °C to +200 °C* All values determined under lab conditions at 23 °C / 50% RH. Application-specific testing recommended.CuringFixture time (zinc-phosphated): 2–4 minutesFixture time (V2A with DELO-QUICK 5002): approx. 20 minutesFinal strength: approx. 24–72 hoursProcessingTypical layer thickness: 0.05–0.1 mm (up to 0.4 mm with activator)Apply directly from bottle or using dispensing equipmentSurfaces should be clean, degreased, and ideally roughenedRecommended AccessoriesCleaner: Storage & Shelf LifeShelf life unopened: 6 months at 0–25 °C, 12 months at 0–10 °CStore cool, dry, protected from light, and in original packagingHazard Identification (CLP)Signal word: Danger.Hazard Statements (H-Sentences)May cause allergic skin reactions.Causes severe eye damage.May cause respiratory irritation.Toxic to aquatic organisms, with long-lasting effects.Precautionary Statements (P-Sentences)Prevention:Wear protective gloves (1-4 hours breakthrough time: recommended Viton® fluoroelastomer / short-term exposure < 15 min nitrile gloves).Wear eye protection or face protection.Avoid release to the environment.Avoid inhaling vapor.Response:If inhaled: Seek medical advice if feeling unwell, call a Poison Center or a doctor.Remove contaminated clothing and wash before reuse.If on skin: Wash with plenty of water and seek medical advice if irritation occurs.If in eyes: Rinse carefully with water for several minutes. Remove contact lenses if possible. Continue rinsing and immediately call Poison Center.Storage and DisposalStore in a well-ventilated place. Keep container tightly closed.Dispose of contents and container in accordance with local, regional, national, and international regulations.Other Relevant InformationContains: 7,7,9(or 7,9,9)-Trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecan-1,16-diylbismethacrylate, methacrylic acid, 2-hydroxyethyl methacrylate, acrylic acid, 2'-phenylacetohydrazide.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)DELO Industrie Klebstoffe GmbH & Co. KGaA, DELO-Allee 1, 86949 Windach, GERMANY, +49 8193 9900-0, , www.delo.de