Loctite 435 Low viscosity instant adhesive clear 20g bottle

LOCTITE® 435 is a colourless, toughened, ethyl-based instant adhesive. It has a fixture time of 10 – 20 secs. Good resistance in humid environments.Pack size: 20 g bottle (Loctite no. 871787)Also available in: 50 g bottle, 500 g bottleApplicationIt has high resistance to impact and shock loads, high peel strength and is suitable for bonding plastics, rubber, metals, porous and absorbent substrates and acidic surfacesCharacteristicsToughened, clearIdeal for bonding small to medium-size partsWell suited to metals, rubbers and plasticsFixture time of 10 – 20 secs.Well suited to porous and/or acidic surfacesSolvent-freeTechnical specifications Chemical Type Ethyl cyanoacrylate Appearance (uncured) Colorless to straw colored, slightlycloudy liquid Fixture Time, Steel 30 – 45 sec. Gap Fill 0.15 mm Key Characteristics Toughened Operating Temperature -40 – 100 °C (-40 – 212 °F ) Shear Strength, Mild Steel (grit blasted) 18.5 N/mm² (2700.0 psi ) Viscosity 200 mPa·s (cP) Key Substrates  Metals , Plastics and RubbersHazards Identification (CLP)Signal word: WarningHazard Statements (H-Codes)H315: Causes skin irritation.H319: Causes serious eye irritation.H335: May cause respiratory irritation.Supplemental Information (EUH-Codes)EUH202: Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.Contains Phthalic anhydride; Methyl acrylate. May produce an allergic reaction.Precautionary Statements (P-Codes)Prevention:P261: Avoid breathing vapours.P280: Wear protective gloves/eye protection.Response:P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337+P313: If eye irritation persists: Get medical advice/attention.Disposal:P501: Dispose of waste and residues in accordance with local authority requirements.Additional Relevant InformationNo specific hazards if used properly.Does not fulfill Persistent, Bioaccumulative and Toxic (PBT) or very Persistent and very Bioaccumulative (vPvB) criteria. Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com