Dowsil 736 Heat-resistant sealant red 300ml cartridge

DOWSIL™ 736 is a one-component, heat-resistant silicone adhesive and sealant for industrial applications. It is permanently resistant up to 260 °C and can withstand short-term exposure to temperatures up to 315 °C.Pack size: 300 ml cartridgeAlso available in: ApplicationsSealing and encapsulation of heating elements in appliancesAerospace gasketingMoving oven beltsIndustrial ovensBag filters in smokestacksOther high-temperature applications in bonding, sealing, and coatingApprovals & CertificationsComplies with FDA Regulation 21 CFR 177.2600 (suitable for incidental food contact if extractive limits are met)Listed under NSF Standard 51 for direct food contactUL (Underwriters Laboratories) listedMeets MIL-A-46106 Rev. BFeaturesSingle-component silicone sealantNon-sagging and non-drippingCan be applied overhead or on vertical surfacesResistant up to 260 °C in continuous operation, short-term up to 315 °CGood adhesion to many substrates; primer can improve adhesionResistant to water, oil, and many chemicalsSuitable SubstratesHeat-resistant materials such as siliconeRubber (recommended: roughen surface before application)Glass and ceramicsCertain plastics (test compatibility before use)Metals with corrosion-resistant surfaces (Not recommended for copper, brass, zinc, steel, galvanized iron, or magnesium.)Not recommended for: Polyethylene, polypropylene, PTFE, concrete, masonry, or highly oil-containing surfacesTechnical Data Temperature Range -65 °C to 260 °C Color Red Flow/Slump None Extrusion Rate (1/8 inch orifice, 90 psi) 390 g/min Specific Gravity 1.04 Skin-over Time 10 minutes Tack-free Time 17 minutes Cure Time (3 mm thickness) 24 hours Hardness, Shore A 26 Tensile Strength 350 psi Elongation 600 %Application InstructionsEnsure the surface is clean, dry, and free of grease. Use appropriate solvents such as acetone or isopropanol for cleaning.For improved adhesion on metal or plastic surfaces, a primer such as DOWSIL™ 1200 Prime Coat can be used.Apply the sealant evenly to the desired surface. A cartridge gun is recommended for precision application.Tooling should be completed within 5 minutes after application before a skin forms.Storage & Shelf LifeStore in a dry place in the unopened original packaging at temperatures, ideally between +5 °C and +30 °C. Avoid direct sunlight.Shelf life: At least 12 months from the date of manufacture. Information on product safety (Manufacturer, Contact)DOW DEUTSCHLAND ANLAGENGESELLSCHAFT MBH, Rheingaustr. 34, 65201 Wiesbaden, GERMANY, +49 611 237007, , www.dow.com