Klüber AMBLYGON TA 15/2 Special grease for high temperatures 25kg

Special grease for long-term lubrication and high temperaturesAMBLYGON TA 15/2 is a longterm and hightemperature lubricating grease based on mineral oil and polyurea. This lubricating grease is used for longterm or lifetime lubrication in the machinebuilding sector covering a wide service temperature range up to 150 °C. AMBLYGON TA 15/2 offers good adhesion, resistance to hot and cold water and diluted alkaline and acid solutions.AMBLYGON TA 15/2 is resistant to oxidation and ageing and protects against corrosion.Size: 25kg bucketAvailable in 45g tube, 400g cartridge, 1kg can, 25kg bucket​Benefits for your application:Versatile grease for many applications subject to high loadsLong service life even when exposed to high temperatures or aggressive mediaLong service life due to the high resistance to water and water vapourLong service life due to the excellent adhesion to the friction pointsImproved sealing effect due to high adhesionLow maintenance due to good corrosion protectionApplication:AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in:    -Conveyors    -Kilns (rotary tubular kilns)    -Water pumps    -Hot rollers    -Tarmac laying machines    -Gate valves    -Seals    -Washing machines and dishwashers    -Impact mechanism in power tools    -Joints, hinges    -King pins AMBLYGON TA 15/2 is also used in combination with mineraloilresistant elastomer seals.Application notes:Prior to series application we recommend checking compatibility with elastomers, if possible in the component under conditions similar to actual use.Product data:Article number020109Chemical composition, thickenerpolyureaChemical composition, type of oilmineral oil Lower service temperature -20°C / -4°F Upper service temperature 150 °C / 302 °F Density at 20 °C approx. 0.93 g/cm³ Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 220 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 18 mm²/s Worked penetration, DIN ISO 2137, 25 °C, lower limit value 285 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 315 x 0.1 mm Speed factor (n x dm) approx. 350 000 mm/min Flow pressure of lubricating greases, DIN 51805, test temperature: -20°C <= 1 400 mbar Oil separation, DIN 51817 N, after 7 d/40 °C <= 5 % by weight Drop point, DIN ISO 2176 >= 220 °C Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Water resistance, DIN 51807 pt. 01, 3h/90 °C, rating 0 - 90 Minimum shelf life from the date of manufacture in a dry, frostfree place and in the unopened original container, approx. 60 months