Klüber ISOFLEX NCA 15 Spindle bearing grease 50g tube

ISOFLEX NCA 15 Spindle bearing greaseISOFLEX NCA 15 is a dynamically light grease with good pressure absorption properties for plain and spindle bearings. It consists of ester oil, synthetic hydrocarbon oil, mineral oil andspecial calcium soap.The product is resistant to water and protects reliably against wearTemperature range: -50°C to +120°C Volume: 50g tubeAlso available in: 400g cartridge, 1kg can , 25kg bucketBenefits for your applicationLonger rolling bearing life due to good wear protection, water resistance and pressure absorption capacityTried and tested over many years especially in high-speed and low-temperature applicationsLow heating-up of bearings due to low lubricant friction leading to longer service lifeLow running torque enables energy savings, particularly at low temperatures, hence costs savings possibleApplicationsISOFLEX NCA 15 is particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings, e.g. bearings in OE-spinning turbines used in the textile industryTechnical specificationsArticle number4180Chemical composition, type of oilmineral oilChemical composition, type of oilester oilChemical composition, thickenerspecial calcium soapTextureshort-fibredTexturehomogeneousLower service temperature-50 °C / -58 °FUpper service temperature120 °C / 248 °FColour spacebeigeDensity at 20 °Capprox. 0,94 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 21 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 4,5 mm²/sSpeed factor (n x dm)approx. 1 300 000 mm/minShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8 000 mPasShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value3 500 mPasCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeLow-temperature torque, IP 186, -50 °C, start<= 1 000 mNmLow-temperature torque, IP 186, -50 °C, running<= 120 mNmDrop point, DIN ISO 2176>= 180 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com