Klüber ISOFLEX TOPAS L 32 N Special low-temperature grease 400ml

Special low-temperature greasesISOFLEX TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of a synthetic hydrocarbon oil and a special lithium soap. ISOFLEX TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance.ISOFLEX TOPAS L 32 N also contains a UV indicator, which ensures quality checking even with minimum quantity lubrication.Content: 400g sprayAvailable in 370g cartridge , 400ml Spray, 1kg can, 25kg bucket, 170kg drumBenefits for your applicationExceed OEM requirements of -40 °CLong service life due to high corrosion protection and resistance to oxidation and ageingMany years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers worldwide)ApplicationISOFLEX TOPAS L 32 and L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sunroofs, seats, headlamps, fan flaps.Both products have been approved by renowned car manufacturers, such as– Volkswagen VW TL 778 A– Daimler DBL 6827.40 and– Daimler DBL 6827.41.ISOFLEX TOPAS L 32 and L 32 N can also be used for:– guideways, bowden cables, door locks– rolling bearings in small motors, fans, pumps– tooth flanks in plastic/plastic gears (e.g. POM, PA and PBT)or plastic/steel material combinations.Technical specificationsArticle number4130Lower service temperature-60 °C / -76 °FUpper service temperature130 °C / 266 °FColour spacebeigeDensity at 20 °Capprox. 0,88 g/cm³TexturehomogeneousTextureshort-fibredNLGI grade, DIN 518182Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 17 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 3,8 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value2 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value4 500 mPasFlow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C<= 450 mbarDrop point, DIN ISO 2176, IP 396>= 185 °CSpeed factor (n x dm)1 000 000 mm/minWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 monthsHazard Statements (CLP)Signal word: DangerHazard Statements (H-phrases)H222: Extremely flammable aerosol.H229: Pressurized container: may burst if heated.H304: May be fatal if swallowed and enters airways.H315: Causes skin irritation.H336: May cause drowsiness or dizziness.H412: Harmful to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.Response:P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.P331: Do NOT induce vomiting.Storage:P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com