Klüber Klübersynth EG 4-320 High-performance gear oil 19l canister

Klübersynth EG 4-320 Synthetic high-performance gear oil N° 012222Klübersynth EG 4 is a fully synthetic high-performance gear oil based on polyalphaolefin satisfying the requirements of many gears.Klübersynth EG 4 offers a high scuffing strength of API GL-4. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations.Klübersynth EG 4 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced.Temperature range: -30°C to +140°CContent: 19l canisterBenefits for your applicationHigh scuffing protectionGood wear protectionExcellent ageing and oxidation resistanceWide service temperature range due to good viscosity-temperature behaviourLow foaming tendencyEnergy savings due to optimised friction behaviourVery good corrosion protectionApplicationKlübersynth EG 4 was especially developed for the lubrication of heavily loaded spur, bevel and planetary gears. It can also be used for the lubrication of worm gears.Klüberoil EG 4 can also be selected for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.Application notesKlübersynth EG 4 can be used for immersion, immersion circulation and injection lubrication.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.When using automatic lubricating systems, please note the manufacturer’s instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.Technical specifications ISO viscosity grade, DIN ISO 3448 320 Lower service temperature -30 °C / -22 °F Upper service temperature 140 °C / 284 °F Density, DIN 51757, 20 °C approx. 0.87 g/cm³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 320 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 33.9 mm²/s Viscosity index, DIN ISO 2909 >= 130 Pour point, DIN ISO 3016 <= -36 °C Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 200 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com