Klüber MICROLUBE GL 261 Special lubricating grease 250ml spray can

Special lubricating greases for boundary friction conditions and tribo-corrosionMICROLUBE GL 261 grease is a special lubricating grease on a mineral oil base. It also contains special lithium soap and the MICROLUBE additive package, which ensures a wear-free surface finish. Running-in wear is reduced to a minimum. In addition, the MICROLUBE additive package provides protection in the boundary friction regime, thus preventing tribo-corrosion. MICROLUBE GL 261 grease has the capacity to absorb high pressures, and it has good anti-corrosion properties.Content: 250ml spray canAvailable in 250ml spray can, 400g cartridge, 1kg can, 25kg bucket, 180kg barrelBenefits:Optimum lubrication in the boundary friction regime, thus preventing machine downtime due to tribo-corrosionTried-and-tested for many years and approved by OEMsLonger component life due to special additives, especially with oscillations and micro-movementsTrouble-free operation of machines due to good pumpability in central lubrication systemsApplication:MICROLUBE GL 261 grease is particularly suitable for low to medium-speed plain and rolling bearings, and for swivel movements and vibrations.Other applications:Linear guidesSerrations, multiple spline shaftsSmall gears, e.g. adjustment gearsIt is generally suitable for machine elements potentially subject to tribo-corrosion.Application notes:MICROLUBE GL 261 grease can be precisely applied by brush, spatula, grease gun, and through centralized lubrication systems. Product data: Chemical composition, thickener special lithium soap Chemical composition, type of oil mineral oil Lower service temperature -30 °C / -22 °F Upper service temperature 140 °C / 284 °F Color space yellow Appearance almost transparent Texture homogeneous Texture fibrous Density at 20 °C approx. 0.89 g/cm³ Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 290 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 20 mm²/s Worked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm Speed factor (n x dm) 300 000 mm/min Flow pressure of lubricating greases, DIN 51805, test temperature: -30 °C <= 1 400 mbar Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176 >= 220 °C Minimum shelf life from the date of manufacture – in a dry, frostfree place and in the unopened original container, approx. 36 monthsHazard Information (CLP)Signal word: DangerHazard Statements (H-Sets)H222: Extremely flammable aerosol.H229: Pressurized container: May burst when heated.H304: May be fatal if swallowed and enters airways.H315: Causes skin irritation.H336: May cause drowsiness or dizziness.H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-Sets)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.Response:P301 + P310: IF SWALLOWED: Immediately call Poison Center/Doctor.P331: Do NOT induce vomiting.Storage:P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.Hazardous Components for LabelingHydrocarbons, C7-C9, Isoalkanes×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com