Klüber STABURAGS NBU 12 ALTEMP lubricating grease for bearings 1kg

Klüber STABURAGS NBU 12 ALTEMP – 005018Lubricating grease for plain and rolling bearings operating at low to medium speedsservice temperature range: -15°C to +120°CMineral oil based lubricating greaseContains solid lubricantsprotects against fretting corrosion and is resistant to hot waterColor: beigeSize: 1kg canBenefits for your applicationFor plain and rolling bearingsGood corrosion protectionResistant to hot waterSuitable for assembly purposesEffective on lubrication points subject to external vibrationsProtects against tribo-corrosionApplicationsrolling and plain bearings and for assembly purposes slideways, threaded spindles, bearing seats and  clamping chucks.Technical SpecificationsRef. Code0050180037Chemical composition solid lubricantChemical composition, thickener barium complex soapChemical composition, type of oil mineral oilLower service temperature -15 °C / 5 °FUpper service temperature 120 °C / 248 °FColour space beigeDensity at 20 °C approx. 1.08 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 19 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 222.5 mm²/sShear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer approx. 10 000 mPasFunctional lubricant filmapprox. -40 °CSpeed factor (n x dm)350 000 mm/minDrop point, DIN ISO 2176, IP 396approx. 170 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.60 months Klüber STABURAGS NBU12 ALTEMP, NBU12 ALTHazard Information (CLP)Signal Word: WarningHazard Statements (H-statements)H302: Harmful if swallowed.H317: May cause an allergic skin reaction.H411: Toxic to aquatic life with long-lasting effects.Safety Instructions (P-statements)Prevention:P264: Wash skin thoroughly after handling.P273: Avoid release to the environment.P280: Wear protective gloves.Response:P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash before reuse.P391: Collect spillage.Additional LabelingHazard-determining components: Reaction mixture of hydrogenated tallow alkylamines with sebacic acid and barium hydroxide, 4-Ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanol, Pin-2(3)-ene×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com