Klüber STABURAGS NBU 12 Bearing grease 50g

Lubricating greases with excellent wear resistanceSTABURAGS NBU 12 is lubricating greases based on mineral oil and barium complex soap. This product is resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, it is resistant to corrosion, water and many diluted alkaline and acid solutionsContent: 50g tubeAvailable in 50g tube, 400g cartridge, 1kg can, 25kg bucketBenefits for your application:Good corrosion protectionGood resistance to ambient mediaExcellent wear protectionGood resistance to tribo-corrosionGood load-carrying capacityGood sealing effectApplication:STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media.It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.Product data:Article number17052NSF-H2 registration135 689Chemical composition, type of oilmineral oilChemical composition, thickenerbarium complex soapLower service temperature-15 °C / 5 °FUpper service temperature130 °C / 266 °FColour spacebrownDensity at 20 °Capprox. 0,99 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value245 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value275 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 220 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 19 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value9 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value15 000 mPasDrop point, DIN ISO 2176, IP 396>= 220 °CFour-ball tester, welding load, DIN 51350 pt. 04>= 3 000 NSpeed factor (n x dm)approx. 350 000 mm/minWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Flow pressure of lubricating greases, DIN 51805, test temperature: -15 °C<= 1 600 mbarMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.60 months Hazards Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H302 + H332: Harmful if swallowed or if inhaled.H317: May cause an allergic skin reaction.Precautionary Statements (P-phrases)Prevention:P264: Wash skin thoroughly after handling.P271: Use only outdoors or in a well-ventilated area.P280: Wear protective gloves.Response:P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash it before reuse.Hazardous Components:Dibarium(2+) ion bis(9-(octadecylcarbamoyl)nonanoate) decanedioate4-ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanolPin-2(3)-ene Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com