Klüber STABURAGS NBU 30 PTM Lubricating grease high resistance 400g

Lubricating and assembly greaseSTABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribocorrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.Content: 400g cartridgeAvailable in 50g tube, 450g cartridge, 1,2kg can, 30kg bucket, 220kg drumBenefits for your application:Assembly grease protecting against tribo-corrosionGood corrosion protectionExcellent resistance to water even under outdoor conditionsApproved by the company Knorr Bremse, N 12006-37Application:STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies.STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods.STABURAGS NBU 30 PTM facili-ates assembly and disassembly of ABS sensors in vehicles.Application notes:Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals.When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush.STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.Product data:Article number17069Chemical compositionsolid lubricantChemical composition, thickenerbarium complex soapChemical composition, type of oilmineral oilLower service temperature-10 °C / 14 °FUpper service temperature160 °C / 320 °FColour spacegreyDensity at 20 °Capprox. 1,10 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value245 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value275 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 490 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 31 mm²/sShear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometerapprox. 15 000 mPasDrop point, DIN ISO 2176, IP 396>= 220 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.60 months  Hazard Information (CLP)Signal word: WarningHazard Statements (H-statements)H302: Harmful if swallowed.Precautionary Statements (P-statements)Prevention:P264: Wash skin thoroughly after handling.P270: Do not eat, drink, or smoke when using this product.Response:P301 + P312 + P330: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.Additional Labeling (EUH-statements)EUH208: Contains pin-2(3)-ene. May cause allergic reactions.EUH212: Caution! Dangerous respirable dust may be formed when used. Do not breathe dust.Hazard-determining Component(s) for LabelingBarium salts Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com