Klüber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 1kg tin

Rolling bearing and high-pressure greaseSTABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener.STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C.Content: 1kg canAvailable in  400g cartridge, 1kg can, 25kg bucketBenefits:Good corrosion protectionGood resistance to ambient mediaGood wear protection / EP propertiesProtects against tribo-corrosionHigh-pressure greaseApplication:STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear.It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.Application notes:The product is applied by brush, spatula or conventional metering systems.Product data:Article number017105 NLGI grade, DIN 51818 2 NSF-H2 registration 135 684 Chemical composition, type of oil mineral oil Chemical composition, thickener barium complex soap Lower service temperature -20 °C / -4 °F Upper service temperature 140 °C / 284 °F Color space brown Density at 20 °C approx. 0.99 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 97 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 11.5 mm²/s Speed factor (n x dm) approx. 500 000 mm/min Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 5 500 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 9 500 mPas Drop point, DIN ISO 2176 >= 220 °C Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 60 months Labelling (REGULATION (EC) No 1272/2008)Hazard pictograms:Signal word : Warning Hazard statements:H302 + H332 Harmful if swallowed or if inhaled.H317 May cause an allergic skin reaction.Precautionary statements:Prevention:P264 Wash skin thoroughly after handling.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves.Response:P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell.P333 + P313 If skin irritation or rash occurs: Get medicaladvice/ attention.P362 + P364 Take off contaminated clothing and wash it before reuse. Hazardous components which must be listed on the label:barium saltsCondensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediolpin-2(3)-ene  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com