Klüber SYNTHESO HT 1500 Long-term high-temperature oil 20kg canister

SYNTHESO HT 1500 Synthetic long-term and high-temperature oils | N° 012107SYNTHESO HT 1500 are long-term and high-temperature oils on a polyglycol basis.They have a high scuffing load capacity and protect well against wear. In the FZG test, DIN 51 354, A/8, 3/90, their scuffing load stage is >12 and their work-related change in weight is ≤ 0.2 mg/kWh.SYNTHESO HT 1500 oils have excellent ageing and oxidation stability and very good viscosity/temperature properties and are ideal for high temperatures.Temperature range: 0°C to +150°C Volume: 20kg canister Also available in: 5l canister,  180kg drumBenefits for your applicationSynthetic long-term and high-temperature oilsVery good viscosity/ temperature propertiesReduce frictionHigh scuffing load capacityGood anti-wear propertiesApplicationsSYNTHESO HT oil are used for the lubrication of spur and bevel gears and rolling bearings such as spherical roller bearings in bowl mill crushers, plain bearings and gear couplings subject to high temperatures and high surface pressure.Substantially less friction and powerful protection against wear are major benefits of these products.Application notesSYNTHESO HT oils are often used for immersion lubrication. Immersion circulation and injection lubrication are supported as well provided that you do not exceed the viscosity limits of the pumps or the entire system.SYNTHESO HT oils are not miscible with mineral oils and synthetic hydrocarbons. Therefore, you are advised to clean the lubrication points before SYNTHESO HT oils are introduced.Because of their high viscosity, be careful about rinsing with SYNTHESO HT. Experience shows that contamination of up to about 5% with mineral oils and hydrocarbons will not be critical. Beyond that level, you should drain the oil once more when it is at operating temperature and completely refill the system with fresh oil.Technical specifications ISO viscosity grade, DIN ISO 3448 1 500 Lower service temperature 0 °C / 32 °F Upper service temperature 150 °C / 302 °F Density, DIN 51757, 20 °C approx. 1.09 g/cm³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 1 500 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C a approx. 230 mm²/s Viscosity index, DIN ISO 2909 >= 220 Pour point, DIN ISO 3016 <= 0 °C Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 200 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com