Klüber UNIMOLY C 220 Special bonded coating 400ml spray

UNIMOLY C 220 Spray, High-pressure resistant, hygrosetting bonded coating | N° 081053UNIMOLY C 220 is a hygrosetting grey bonded coating with an MoS2 base (molybdenum disulfide) and an inorganic binding agent.UNIMOLY C 220 is a fluid, ready-to-use product containing a mixture of flammable solvents. Once applied and hardened, the bonded coating is very resistant to pressure and has a wide temperature range.Owing to its structure, UNIMOLY C 220 is particularly suitable for high-vacuum applications. Adhesion is very good on special steel, metal and electroplated surfaces.Temperature range: -180°C to +450°C Size: 400ml spray canAlso available in: 1l can, 20l bucketBenefits for your applicationHygrosetting at room temperatureSuitable for high pressuresResistant to low and high temperaturesSuitable for vacuum applicationsExcellent adhesion on metalsSuitable for materials susceptible to cold welding, e.g. special steel nuts and boltsWell-proven as an assembly aidImproves the running-in processPrevents stick-slipApplicationsUNIMOLY C 220 reduces friction and wear in metal/metal sliding contacts. It prevents nuts and bolts from seizing, and ensures a uniform tightening moment and low friction.UNIMOLY C 220 is also used as a running-in agent, e.g. for gears. Other fields of application are clinch bolts, hinge and lock components, slideways, spindles and other slowly sliding components subject to high loads. Application notesStir or shake well before use. This also applies to the spray version. UNIMOLY C 220 can be applied by immersion, spraying or by brush. Other types of application are indicated upon request. The surfaces to be coated must be cleaned/ degreased and be completely free from oil, grease, water, corrosion and scale. When applying UNIMOLY C 220 by spraying, use a paint spray gun. Technical specifications Article number  081053 Colour space  grey Service temperature, lower limit -180 °C Service temperature, upper limit  450 °C Density, DIN EN ISO 2811-3, 20°C approx. 1.08 g/cm³ Yield with a tribo-film thickness, 10 µm  approx. 10 m²/l Cross-cut adhesion, DIN EN ISO 2409, based on standard, Klübermethod: PA 063 / material: test plate 0 Gt Minimum shelf life from the date of manufacture – in a dry, frost-freeplace and in the unopened original container, approx. 24 months  Hazard Statements (CLP)Signal word: Danger.Hazard Statements (H-Sentences)H222: Extremely flammable aerosol.H229: Pressurized container: May burst if heated.H318: Causes serious eye damage.H336: May cause drowsiness or dizziness.H412: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-Sentences)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P280: Wear eye/face protection.Response:P305 + P351 + P338 + P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.Storage:P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com