Klüber UNISILKON L 50/2 High-temperature grease 750g tin

UNISILKON L 50/2 is a high-temperature grease for rolling and plain bearings based on silicone oil and PTFE solid lubricants suitable for a wide service temperature range.The long-term grease UNISILKON L 50/2 has a good wetting ability on metal surfaces and offers good wear protection, resistance to ambient media and thermal stability. You can extend relubrication intervals and reduce cleaning and maintenance costs, so UNISILKON L 50/2 can reduce your operating costs.Your benefits at a glance:Made of special raw materials to ensure long-term and for-life lubrication at high temperaturesWear reduction for increased component availability due to its good pressure absorption capacityVersatile use due to good compatibility with aqueous solutionsApplication:UNISILKON L 50/2 is a long-term lubricating grease for rolling bearings subject to high thermal stress. It has proven effective in applications in the wood, textile and paper industries.UNISILKON L 50/2 can also be used for plain bearings in metal/ plastic material combinations and as assembly aid for rubber parts like seals.UNISILKON L 50/2 is resistant to hot and cold water and water vapour. It is not resistant to most organic solvents, strong acids and alkaline solutions.Application notes:UNISILKON L 50/2 is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their compatibility should be checked prior to series applications. UNISILKON L 50/2 can be applied by means of spatula, brush, usual metering devices or the tampon printing method.Product data: Chemical composition, type of oil silicone oil Chemical composition, solid lubricant PTFE Lower service temperature -50 °C / -58 °F Upper service temperature 200 °C / 392 °F Color space white Texture almost homogeneous Texture short-fibred Density at 20 °C approx. 1.25 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 25 °C approx. 200 mm²/s Speed factor (n x dm) approx. 500 000 mm/min Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Copper corrosion, DIN 51811, (lubricating grease), 24h/150 °C 1 - 150 corrosion degree Flow pressure of lubricating greases, DIN 51805, test temperature: -50 °C <= 1 400 mbar Drop point, DIN ISO 2176, IP 396 >= 250 °C Resistance to cold and hot water and water steam up to approx. 130 °C passed Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 monthsKluber UNISILKON L50-2, Klueber UNISILKON L-50 2    Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com