Klüber VARILUB NBU 15/300 Spindle bearing grease 25kg

Klüber VARILUB NBU 15-300 – Spindle bearing grease – 25kgDescription:VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil and mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion and wear protection, resistance to water and media as well as ageing and oxidation stability.Benefits for your application:- Savings in costs for bearings due to the good corrosion and wear protection as well as pressure absorption capacity of the grease, therefore long service life and maintenance intervals- Reduced wastewater disposal costs due to good water resistance resulting in a long service life and relubrication intervals- Trouble-free operation of machines due to easy pumpability and metering in central lubrication systemsApplication:VARILUB NBU 15/300 has been especially developed for highspeed rolling and plain bearings, e.g. tool and textile spindle bearings, threaded spindles, ball screws subject to high loads, chassis bearings. It can also be used as long-term grease for bearings in cableways and precision engineering, or for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves).Application notes:The lubricant is applied by brush, spatula, grease gun or cartridge. Owing to the many different elastomer and plastic compositions their compatibility has to be checked prior to series applications.The product can normally be applied by means of centralised lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed for each individual application. We will be pleased to provide assistance in this matter.Product data: Chemical composition, type of oil ester oil Chemical composition, thickener barium complex soap Chemical composition, type of oil synthetic hydrocarbon oil Upper service temperature 130 °C / 266 °F Lower service temperature -30 °C / -22 °F Color space beige Texture homogeneous Worked penetration, DIN ISO 2137, 25 °C, lower limit value 300 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm Speed factor (n x dm) approx. 1 000 000 mm/min Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 2 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 5 000 mPas Base oil viscosity at 40 °C, calculated value approx. 23 mm²/s Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Copper corrosion, DIN 51811, (lubricating grease), 24h/120 °C 1 - 120 corrosion degree Drop point, DIN ISO 2176 >= 220 °C Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 months Hazard Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H302 Harmful if swallowed.Precautionary Statements (P-phrases)Prevention:P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.Response:P301 + P312 + P330 IF SWALLOWED: If feeling unwell, call a POISON CENTER/doctor. Rinse mouth.Hazardous Components for LabelingReaction mixture of hydrogenated tallow alkylamines with sebacic acid and barium hydroxide. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com