Klüberalfa YV 93-1202 Sliding agent for valves, fittings 1kg tin

Klüberalfa YV 93-1202 Sliding agent for valves, fittings and installations carrying oxygen under very high partial pressure (NLGI grade 2) | N° 013006Klüberalfa YV 93-1202 is a white sliding agent with a good wetting capacity on the basis of perfluorinated polyether oils and solid lubricants.Klüberalfa YV 93-1202 provides an exceptionally high stability to oxygen surges and very good resistance to various chemicals.To ensure continuous adherence to this high quality standard, Klüberalfa YV 93-1202 is manufactured in small series subject to strict hygiene requirements and each batch is inspected based on M 034-1 list of nonmetallic materials (213-075).Pack size: 1 kg can Benefits for your applicationHigh operational safety for installations and components carrying gaseous oxygendue to high oxygen pressure resistance (see product data)due to good compatibility with most materials used in this branch of industrydue to a wide service temperature rangeAlso suitable for installations and components carrying liquid oxygenEach product batch is checked for its reactivity to oxygenApplicationsKlüberalfa YV 93-1202 is used as a sliding agent for the lubrication of valves, fittings and installations carrying gaseous and/or liquid oxygen, in individual cases subject to gas pressures considerably above 300 bar, or in chemical installations and equipment requiring high resistance to various gases. Possible applications are:Oxygen valvesPeripheral aggregates of chemical installationsHose couplings, e.g. oxygen pipe connections, sliding and plain bearings, bolts, slideways, etc.Steel and heavy industryAssembly aid for most rubber-elastic materials and plasticsFor the industrial handling, maintenance and care of oxygen componentsApplication notesAll surfaces to be wetted must be thoroughly cleaned prior to product application.The friction / lubrication points of surfaces / components must be clean and bright (i.e. free from oil, grease, dirt particles or perspiration). We recommend cleaning the surfaces with clean white spirit and then Klüberalfa XZ 3-1, ensuring residue-free surfaces when dried. For valves and installations carrying oxygen, the application procedure must also be oxygen clean in order to attain a ready for oxygen service condition. Technical specifications Manufacturer number 0130060037 Chemical composition, type of oil  PFPE NLGI grade, DIN 51818 2 Colour space white Chemical composition  solid lubricant Density at 20 °C ca. 2,00 g/cm³ Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer ca. 7000 mPas Lower service temperature -60 °C Upper service temperature 200 °CHazard Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com