Klüberbio EG 2-68 Environmentally friendly, synthetic high-performance gear oil 20L

Klüberbio EG 2-68 Environmentally compatible, synthetic high-performance gear oils | N° 009043Klüberbio EG 2 oils are ultimately biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials.Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads.Temperature range: -25°C to +120°C Volume: 20 l canisterAlso available in: 1 l can, 200 l barrelBenefits for your applicationComply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)Ultimately biodegradable and not toxic to marine organisms reducing environmental impact in the event of leakageKlüberbio EG 2 oils have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loadsStandard NBR and FKM elastomers of the leading propeller shaft seal manufacturers are resistant to and approved for use with Klüberbio EG 2 oils, preventing leakages and impuritiesApplicationsKlüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives.Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances. Application notesIn general, our completely biodegradable high-performance gear oils are miscible with mineral oils and synthetic hydrocarbons. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend cleaning the lube points or flushing the gear with the Klüberbio EG 2 oil to be used.The Klüberbio EG 2 oil to be used needsto be approved by the OEMs of the equipment. In case the oil is not approved or the equipment’s specification has been changed – e.g. type, design or material of the sealing – we recommend consulting the OEM prior to the oil change. Technical specifications Article number 0280770766 Colour space yellow Service temperature, lower limit -25 °C Service temperature, upper limit 120 °C Conformance, CLP, DIN 51517-3  passed  Designation, DIN 51502 CLP E 68 Biodegradability, OECD 301 F  ≥ 60 % Density, DIN 51757, 15°C approx. 909 kg/m³ Flash point, DIN EN ISO 2592, Cleveland open cup  ≥ 260 °C ISO viscosity grade, DIN ISO 3448, ISO VG 68  Viscosity index, DIN ISO 2909 approx. 140 Pour point, DIN ISO 3016 ≤ -25 °CKlüberbio EG2-68, Klüberbio EG 2 68Classification of the substance or mixtureClassification (REGULATION (EC) No 1272/2008)Not a hazardous substance or mixture.2.2 Label elementsLabelling (REGULATION (EC) No 1272/2008)Not a hazardous substance or mixture.2.3 Other hazardsThis substance/mixture does not contain components at concentrations of 0.1% or higher that are classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB).Environmental information:The substance/mixture does not contain components with endocrine-disrupting properties at concentrations of 0.1% or more, as defined in REACH Article 57(f) or Commission Delegated Regulation (EU) 2017/2100 or Commission Delegated Regulation (EU) 2018/605.Toxicological information:The substance/mixture does not contain components with endocrine-disrupting properties at concentrations of 0.1% or more, as defined in REACH Article 57(f) or Commission Delegated Regulation (EU) 2017/2100 or Commission Delegated Regulation (EU) 2018/605. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com