Klüberbio M 72-82 Biodegradable Synthetic Special Grease 25kg

Klüberbio M 72-82 Ultimately biodegradable special grease NLGI 2 | N° 009021Klüberbio M 72-82 is a fully synthetic and ultimately biodegradable special grease classified in water pollution category 1. Its biodegradability acc. to OECD 301 F is > 60 % after 28 days.Klüberbio M 72-82 is very resistant to water, protects against corrosion, shows a good load-carrying capacity and ageing resistance.Temperature range: -40°C to +140°C Volume: 25kg bucketAlso available in: 400g cartridge, 1kg can, 180kg barrelBenefits for your applicationUltimately biodegradable, therefore environment-friendlyGood adhesion and water resistance for long relubrication intervalsGood pressure-absorption capacityGood pumpability through central lubrication systems over a wide temperature rangeApplicationsKlüberbio M 72-82 should be used wherever there is a risk of the lubricant contaminating the soil or water. It is therefore recommended for applications in water treatment plants, hydroelectric power plants, installations in ports, paper mills, etc., to lubricate rolling and plain bearings, chains, joints, open drives, ropes, racks and gear rims. It is also suitable for the lubrication of woodworking machines, construction machines, agricultural and forestry equipment as well as truck chassis.Klüberbio M 72-82 can also be used in water sports vehicles, bicycles, lawn mowers and similar outdoor equipment. Application notesKlüberbio M 72-82 can be applied by brush, spatula, grease gun and with automatic metering devices. It shows good pumpability based on the positive Vogel/Marawe FTG 2 test results.Technical specifications Article number 009021 009021 Colour space  beige Service temperature, lower limit  -40 °C Service temperature, upper limit  140 °C  Biodegradability, OECD 301 F, 28, within days  ≥ 60 % Density, Klüber method: PN 024, 20°C  approx. 0.94 g/cm³ NLGI grade, DIN 51818 2  Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 28 mm²/s Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C  approx. 120 mm²/s  Dropping point, DIN ISO 2176 / IP 396  > 220 °C Speed factor (n x dm)  approx. 300000 mm/min Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.  36 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com