Klüberfluid NH1 4-005 Synthetic barrier fluid for mechanical seals 20L

Klüberfluid NH1 4-005 Synthetic barrier fluid for mechanical seals | N° 029066Klüberfluid NH1 4-005 is based on a synthetic hydrocarbon oil and was developed for the lubrication of mechanical seals operating under various conditions in the chemical and pharmaceutical industries.Klüberfluid NH1 4-005 is NSF H1 registered and therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. Temperature range: -55 °C to 150 °CContent: 20 l canisterAvailable in 1 l can, 200 l barrelBenefits for your applicationNo build-up of deposits if the product is used according to the intended purpose in mechanical seals due to the advanced synthetic oil formulationISO 21469 certified – supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website.ApplicationKlüberfluid NH1 4-005 can be used as a barrier fluid in mechanical seals operating under inert gas conditions. Mechanical seals have been used in mixers, driers, mills, kneaders, reactors and pumps in the chemical and the pharmaceutical industry for many years.Klüber Lubrication offers a range of oils that were especially developed for use as a barrier medium in mechanical seals. The more the seal is stressed in terms of pressure, speed and heat, the lower should the oil’s viscosity be. For naturally circulating barrier fluids, the selected oil viscosity is normally approx. 5 mm²/s, as is the case with Klüberfluid NH1 4-005.Technical specificationsArticle number0290660766Composition, type of oilSynthetic hydrocarbon oilAppearanceClearColour spaceColourlessService temperature, lower limit-55 °CService temperature, upper limit, inert gas150 °CNSF H1 registration number143373Flash point, DIN EN ISO 2592, Cleveland open cup≥ 150 °CKinematic viscosity, DIN EN ISO 3104 / DIN 53000-1, based on standard / ASTM D445 / ASTM D7042, 100°Capprox. 1.7 mm²/sKinematic viscosity, DIN EN ISO 3104 / DIN 53000-1, based on standard / ASTM D445 / ASTM D7042, 40°Capprox. 5 mm²/sPour point, DIN ISO 3016, ASTM D97, ASTM D5950, ASTM D7346≤ -60 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.60 monthsHazard Information (CLP)Signal word: Danger.Hazard Statements (H-phrases)H304 May be fatal if swallowed and enters airways.H332 Harmful if inhaled.Precautionary Statements (P-phrases)Prevention:P261 Avoid breathing vapor.P271 Use only outdoors or in a well-ventilated area.Response:P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.P331 Do NOT induce vomiting.Storage:P405 Store locked up.Hazardous Components for Labeling1-Decene, dimer, hydrogenated Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com