Klüberfood NH1 94-52 Special grease for food industry 400g cartridge

Klüberfood NH1 94-52 Fully synthetic multipurpose grease for the food-processing and pharmaceutical industries | N° 096172As a manufacturer or operator of production or packaging equipment in the food-processing or pharmaceutical industry you are facing ever more challenges, e.g. the requirement to cover several applications with a single lubricant concept.This often coincides with the implementation of new technologies, rising requirements and the need to select a new lubricant. It is precisely for these requirements that we have developed Klüberfood NH1 94-52 based on a synthetic hydrocarbon oil and a calcium special soap.Temperature range: -40°C to +120°C Volume: 400g cartridgeAlso available in: 1kg can, 25kg bucket, 180kg drumBenefits for your applicationExtended maintenance intervals, e.g. in rolling bearings and linear guidesdue to high load-carrying capacity and very good wear protectiondue to very good oxidation resistanceExcellent adhesion leading to reduced grease consumptionParticularly good protection of components due to good water resistanceNSF H1 registered and in compliance with kosher and halal requirementsApplicationsYou may use Klüberfood NH1 94-52 as a multipurpose grease, especially for the lubrication of rolling bearings and linear guides. Experience in practice has shown that a multitude of lubricants used in your plant can in fact be replaced by a single product concept: Klüberfood NH1 94-52. Application notesYou may use Klüberfood NH1 94-52 e.g. for the initial lubrication or relubrication of rolling bearings and linear guides. Prior to initial lubrication, we recommend users should verify compatibility with the lubricant.Before applying the grease, all lubrication points should be thoroughly cleaned. We recommend conducting an additional risk analysis, e.g. HACCP. Klüberfood NH1 94-52 is applied by spatula, grease gun, grease cartridge or via central lubrication systems. Technical specifications Lower service temperature -40 °C  Upper service temperature 120 °C Texture homogeneous Colour space brown Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C <= 1 400 mbar Density at 20 °C approx. 0.95 g/cm³ Kinematic viscosity of the base oil 40 °C  ca. 50 mm²/s Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C  <= 1 - 100 corrosion degree Drop point, DIN ISO 2176, IP 396 >= 260 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com