Klüberlub BE 41-542 Heavy duty grease for rolling bearings 1kg can

Klüberlub BE 41-542 Heavy-duty grease for high-load rolling bearings | N° 020269High loads and shocks can damage rolling bearings and lead to their premature failure.To prevent this, we developed Klüberlub BE 41-542 on the basis of highly viscous mineral oil, lithium special soap, EP/AW and anticorrosive additives.This selected combination makes Klüberlub BE 41-542 a preferred choice for numerous applications involving high loads.Volume: 1 kg can Also available in: Cartrigde 400 g, Bucket 5 kg, Bucket 25 kg, Drum 180 kgBenefits for your applicationGood pressure absorption capacityVery good wear protectionHigh corrosion protectionStrong adhesivenessApplicationTypical Klüberlub BE 41-542 applications are in high-load rolling bearings operating at low to medium speeds such as forload rollers in rotary kilns for the cement industry,crane wheels,bucket wheel excavators,hammer crushers, hammer mills,work rolls in hot strip mills,cold pilger rolling mills, androlling bearings subject to shock or pulsating stress.Application notesThe ambient temperature should be ≥ 15 °C when applying the product with an automatic grease pump.Technical specifications Chemical composition, thickener special lithium soap Chemical composition, type of oil mineral oil Lower service temperature -20 °C / -4 °F Upper service temperature 140 °C / 284 °F Color space brown Texture homogeneous Density at 20 °C approx. 0.93 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 540 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 28 mm²/s NLGI grade, DIN 51818 2 Speed factor (n x dm) approx. 500 000 mm/min Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C <= 1 400 mbar Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000 min-1, axial load: 1500 N, temperature: 140 °C, service life F50: >= 100 h Drop point, DIN ISO 2176 >= 230 °C Four-ball tester, welding load, DIN 51350 pt. 04 >= 3 000 N Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90Hazard Information (CLP)Signal Word: WarningHazard Statements (H-phrases)H315: Causes skin irritation.H319: Causes serious eye irritation.H411: Toxic to aquatic life with long lasting effects.Precautionary Statements (P-phrases)Prevention:P264: Wash hands thoroughly after handling.P273: Avoid release to the environment.P280: Wear protective gloves/eye protection/face protection.Response:P332 + P313: If skin irritation occurs: Get medical advice/attention.P337 + P313: If eye irritation persists: Get medical advice/attention.P391: Collect spillage.Other Relevant InformationThis substance/mixture does not contain PBT or vPvB components according to REACH.Contains no components with endocrine-disrupting properties. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com