Klüberoil GEM 1-680 N High-performance gear oil 20l canister

Klüberoil GEM 1-680 N High-performance gear and multipurpose oil based on mineral oil | N° 030064Klüberoil GEM 1 N is a high-performance gear and multipurpose oil based on selected mineral oils satisfying the growing requirements and increasing power density of modern gears.Klüberoil GEM 1 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klüberoil GEM 1 N without prior consultation with the gear manufacturer provided the general application notes are observed.Temperature range: 0°C to +100°C Volume: 20 l canisterAlso available in: 200l drumBenefits for your applicationHigh scuffing protectionExcellent wear protection for gears and rolling bearingsGood shear stability for reliable lubricant film formationHigh micropitting resistanceExcellent ageing and oxidation resistanceLow foaming tendencyApplicationsKlüberoil GEM 1 N was specially developed for the lubrication of spur, bevel and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996.Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.Application notesKlüberoil GEM 1 N can be applied by means of immersion, immersion circulation or injection. The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.When using automatic lubricating systems, please note the manufacturer’s instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.Technical specifications Lower service temperature 0 °C / 32 °F Upper service temperature 100 °C / 212 °F Density, based on DIN 51757) at 15 °C approx. 930 kg/m³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 680 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 37 mm²/s Viscosity index, DIN ISO 2909 >= 85 ISO viscosity grade, DIN ISO 3448 680 Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 200 °C Pour point, DIN ISO 3016 <= -5 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com