Klüberplex SK 12 Special lubricating grease for plain bearings 1kg can

Special lubricating grease for plain bearingsService temperature range: -40°C to +140°Csemi-synthetic long-term greasehigh pressure absorption capacity at low speedsgood adhesion on the component and resistance to aggressive mediaenhance wear protectionComposition: barium complex soap, synthetic hydrocarbon oil, mineral oilColour: beigeSize: 1kg canalso available as: bucket: 25kgBenefits for your applicationLess maintenance due to long-term lubricationReliable function and sealing against dust and dirtVersatile application even under high loads and low speedsLong component life due to high wear and corrosion protectionTried and tested for many bronze plain bearings, good compatibility with nonferrous metalsAlso suitable for relubrication; miscible with many commercial bearing greasesApplicationlubrication of bronze plain bearings, e.g. Wieland-B09 (CuSn8)sliding elements and plain bearing bushes subject to low sliding speeds or oscillations in the mixed friction regimejoints and self-aligning bearings in building machines or agricultural and forestry vehiclesrolling bearings subject to high loads and speeds up to approx. 100,000 mm/minTechnical SpecificationsChemical composition, thickener barium complex soapChemical composition, type of oil synthetic hydrocarbon oilChemical composition, type of oil mineral oilLower service temperature -40 °C / -40 °FUpper service temperature 140 °C / 284 °FColour space beigeDensity at 20 °C approx. 0.93 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value310 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value340 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 500 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 43 mm²/sShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8 000 mPasShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value4 000 mPasDrop point, DIN ISO 2176, IP 396>= 220 °CFlow pressure of lubricating greases, DIN 51805, test temperature: -40 °C<= 1 400 mbarMinimum shelf life from the original container, approx36 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com