Klübersynth GH 6-22 Synthetic high-performance gear oil 20l canister

Klübersynth GH 6-22 Synthetic high-performance gear and high-temperature oil with KlüberComp Lube TechnologyKlübersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.ISO viscosity grade: 22Temperature range: -55°C to +160°C Volume: Canister 20 lAlso available in: Drum 200 l​Benefits for your applicationHigh scuffing protectionExcellent wear protection for gears and rolling bearingsGood shear stability for reliable lubricant film formationHigh micropitting resistanceOptimised for the lubrication of worm gearsExcellent ageing and oxidation resistanceWide service temperature range due to good viscosity-temperature behaviourLow foaming tendencyEnergy savings due to optimised friction behaviourGood elastomer compatibilityApprovals by numerous gear OEMsApplicationKlübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings.Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures.It can also be used for the lubrication of lifting, drive and transport chains.Technical specifications Lower service temperature -55°C / -67°F Upper service temperature 160 °C / 320 °F ISO viscosity grade, DIN ISO 3448 22 Density, based on DIN 51757) at 15 °C ca. 1 025 kg/m³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 20 °C ca. 54 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C ca. 22 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C ca. 5,3 mm²/s Viscosity index, DIN ISO 2909 >= 150 Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 165 °C Pour point, DIN ISO 3016 <= -55 °C Foam test, ASTM-D 892, ISO 6247, sequence I/24 °C <= 100/10 ml Foam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C <= 100/10 ml Foam test, ASTM D 892, ISO 6247, sequence III/24°C <= 100/10 ml Copper corrosion, DIN EN ISO 2160, 24 h/100°C 1 - 100 corrosion degree Anticorrosive properties on steel, DIN ISO 7120, method A, steel, 24 h/60 °C no rust corrosion degree Ageing properties, ASTM D 2893, increase in viscosity <= 6 % FZG scuffing test, based on DIN ISO 14635-1, A/16.6/90, scuffing load stage         >= 12                           FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage >= 14 API scuffing load capacity  FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of rolling element < 5 mg FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of cage <= 200 mg Minimum shelf life from the date of manufacture - in a dry, frost-free place  and in the unopened original container, approx. 36 Monts  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com