Klübersynth GH 6-460 Synthetic High-performance Gear Oil PG 5L

Klübersynth GH 6-460 is a synthetic high-performance gear and high-temperature oil (ISO VG 460) with KlüberComp Lube Technology. Based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Size: 5 l canister Also available in: 1 l can, , ApplicationKlübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings.Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures.It can also be used for the lubrication of lifting, drive and transport chainsBenefits for your applicationHigh scuffing protectionExcellent wear protection for gears and rolling bearingsGood shear stability for reliable lubricant film formationHigh micropitting resistanceOptimised for the lubrication of worm gearsExcellent ageing and oxidation resistanceWide service temperature range due to good viscosity-temperature behaviourLow foaming tendencyEnergy savings due to optimised friction behaviourGood elastomer compatibilityApprovals by numerous gear OEMsApplication notesKlübersynth GH 6 can be applied by means of immersion, immersion circulation or injection.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.When using automatic lubricating systems, please note the manufacturer’s instructions regarding the maximum permissible viscosity.The low-viscosity varieties are also used for oil mist lubrication.Technical specificationsArticle number 0121630764Lower service temperature-25 °C / -13 °FUpper service temperature160 °C / 320 °FISO viscosity grade, DIN ISO 3448460Density, based on DIN 51757) at 15 °Capprox. 1 074 kg/m³Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 20 °Capprox. 1 240 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 460 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 71 mm²/sViscosity index, DIN ISO 2909>= 230Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus>= 250 °CPour point, DIN ISO 3016<= -25 °CKlübersynth GH6-460, Klübersynth GH 6 460 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com