Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 1kg

Synthetic heavy-duty grease for long-term lubricationAs a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klübersynth HBE 94-401 we offer you a lubricating greasebased on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanicalloads providing excellent wear protection. Moreover, Klübersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Areyour components subject to strong oscillations? With its very good antiwear properties, Klübersynth HBE 94-401 meets this challenge too.Size: 1kg canAvailable in 400g cartridge, 1kg can, 25kg bucketBenefitsVery good wear protection,Excellent corrosion protectionExcellent water resistanceReduced maintenance costs due to extended relubrication intervals or lifetime lubrication, even at elevated temperatures due to synthetic grease technologyApplicationloaded rolling and plain bearings at high temperatures, e.g. in the steel industry.This special lubricating grease meets the complex requirements of your for-life lubricated components, e.g. in– support rollers in continuous casting installations– conveyor roller bearings in continuous furnaces– support roller bearings in pickling and tin plating– plain bearings of forging pressesDue to its excellent wear resistance this lubricating grease can also be used for roller bearings in wood pellet presses.Product dataArticle number4295Chemical composition, type of oilsynthetic hydrocarbon oilChemical composition, thickenercalcium complex soapLower service temperature-35 °C / -31 °FUpper service temperature160 °C / 320 °FColour spacebrownTexturelong-fibredTexturehomogeneousDensity at 20 °Capprox.  0,93 g/cm³Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C<= 1 400 mbarWorked penetration, DIN ISO 2137, 25 °C, lower limit value290 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value320 x 0,1 mmSpeed factor (n x dm)approx. 300 000 mm/minShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value4 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8 000 mPasKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 400 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 40 mm²/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeOil separation, DIN 51817 N, after 7 d/40 °C<= 3 % by weightDrop point, DIN ISO 2176, IP 396>= 230 °CFour-ball tester, welding load, DIN 51350 pt. 04>= 2 800 NWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating0 – 90Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.24 months Hazard information (CLP)Signal word: Warning.Hazard statements (H-phrases)H319: Causes serious eye irritation.Precautionary statements (P-phrases)Prevention:P264: Wash skin thoroughly after handling.P280: Wear eye protection / face protection.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice / attention.Additional labelling (EUH-phrases)EUH208: Contains Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts; Condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol. May produce an allergic reaction. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com