Klübersynth HLR 46-371 Assembly grease for elastomer/metal slides 1kg

Klübersynth HLR 46-371 Lubricating and assembly grease for elastomer/metal sliding material combinations (sensitive to mineral oil) | N° 012191Klübersynth HLR 46-371 is an adhesive, pliant and high-temperature resistant special lubricating grease. Due to the product composition (base oil: polyalkylene glycol oil; thickener: special lithium soap) it is possible to use it in context with many elastomers which are sensitive to mineral oil (particularly EPDM) and plastics.Outstanding performance data:Very wide service temperature rangeGood corrosion protectionGood water resistanceExcellent oxidation stabilityTemperature range: -40°C to +150°C Volume: 1 kg can Also available in: 18 kg bucket, 25 kg bucket, 180 kg barrelBenefits for your applicationLubricating and assembly pasteService temperature range – 40 / 150 °CFor elastomer/metal sliding material combinationsApplicationsElastomer/metal or plastic/metal sliding material combinations, eg in car componentsBrake boostersDrum brakesDisc brakesMain brake cylindersABSSmall gears (metal/plastic)Rolling bearings with EPDM sealing disksRadial shaft seals with EPDM elastomerApplication notesCompatibility with elastomers and plastics: The following elastomers were tested 168 h for compatibility with Klübersynth HLR 46-371 at 100 and 150°C. We recommend checking the compatibility of the lubricating grease and the contacting material, especially prior to series applications (our test results were obtained with samples and are not a substitute for your own testing). Technical specifications Article number   0121910037 Composition, thickener  lithium complex soap Composition, type of oil polyalkylenglycol Colour space red Texture fibrous , homogeneous Service temperature, lower limit -40 °C Service temperature, upper limit 150 °C Density, Klüber method: PN 024, 20°C approx. 0.97 g/cm³ Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 57.5 mm²/s Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 363 mm²/s Dropping point, DIN ISO 2176 / IP 396 ≥ 220 °CKlübersynth HLR46-371, Klübersynth HLR 46371, Klübersynth HLR46371  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com