Klübersynth UH1 14-222 Lubricating grease for food industry 1kg can

Klübersynth UH1 14-222 Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries | N° 096071Klübersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.Klübersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.The lubricant was developed for incidental contact with products and packaging materials in the food processing, cosmetics, pharmaceutical or animal feed industries.The use of Klübersynth UH1 14-222 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCPTemperature range: -25°C to +120°C Volume: 1kg canAlso available in: 400g cartridge, 25kg bucket, 180kg drumBenefits for your applicationFacilitates product streamlining owing to its wide range of applicationsOffers improved surface protection through good adhesion and its particular consistencyISO 21469 certified – supports the compliance with the hygienic requirements in your production. You will find further information about ISO Standard 21469 on our website www.klueber.comApplicationsKlübersynth UH1 14-222 is suitable for use in machines, installations and equipment of the food-processing and pharmaceutical industries, particularly for lubrication points thatmay have incidental and technically unavoidable contact with the food product.This food-grade lubricant is intended for the universal lubrication of rolling and plain bearings, lifting cylinders, joints, guide rods and rails, cams, etc.Technical specificationsArticle number096071NLGI grade, DIN 518182NSF-H1 registration128 827Lower service temperature-25 °C / -13 °FUpper service temperature120 °C / 248 °FColour spacebeigeTexturehomogeneousDensity at 20 °Capprox. 0,94 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 260 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox.29 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value6 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value12 000 mPasLow-temperature torque, IP 186, – 25 °C, start<= 1 000 mNmLow-temperature torque, IP 186, - 25 °C, running<= 100 mNmDrop point, DIN ISO 2176, IP 396>= 220 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.24 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com