Klübertemp GR M07 N Long-term lubricant 1kg can

Klübertemp GR M07 N Long-term grease for a wide temperature range NLGI 1 | N° 090212Klübertemp GR M-N greases are white long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener.The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range.Klübertemp GR M-N greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materialsTemperature range: -65°C to +180°C Volume: 1kg canAlso available in: Bucket 10 kgBenefits for your applicationVersatile use for components under particularly demanding conditions Over a wide service temperature rangeIn contact with aggressive media Where sensitive plastic materials are usedApplicationsKlübertemp GR M07 N greases are preferably used for the lubrication of electromechanical actuators and small gears where they show low breakaway torques at low temperatures, exceptionally low friction values as well as a reduced tendency to stick-slip. Application notesFor optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Thenblow the surfaces with clean, dry air or hot air to remove solvent residues. For initial lubrication, the friction points must be clean andbright, i.e. free from oil, grease, perspiration and contamination. Klübertemp GR M …N greases may be applied directly or by meansof brush, spatula or lubricant dispenser.Technical specificationsArticle number090212Chemical composition, type of oilPFPEChemical composition, solid lubricantPTFELower service temperature-65 °C Upper service temperature180 °C Density at 20 °Capprox. 1.91 g/cm³NLGI grade, DIN 518181Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit310 0.1 mm Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 340 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 40 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 11 mm²/sCopper corrosion, DIN 51811, 24 h, 100°C1 – 100 – 24 corrosion degree Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com