Kluebersynth LR 44-21 Low-temp grease for vehicle components 1kg can

Kluebersynth LR 44-21 Low-temperature grease for vehicle componentsKlübersynth LR 44-21 is a beige, homogeneous and dynamically light lubricating grease.A special lithium soap and coordinated synthetic hydrocarbon and mineral oil components form the main ingredients.Its many years of use have shown that Klübersynth LR 44-21 is aging-resistant, particularly adhesive and largely neutral to plastics and body paints.Klübersynth LR 44-21 is easy to pump and dose, offers high corrosion protection and good water resistance.Temperature range: -55°C to +130°CVolume: Can 1 kgAlso available in: Bucket 25 kg, Bucket 50 kg, Drum 170 kgBenefits for your applicationGood noise dampeningWide service temperature range – For different applicationsGood material compatibility – Universal usesApplicationsDue to its excellent low-temperature characteristics, Klübersynth LR 44-21 is primarily used in motor vehicles, e.g. for sliding guideways in lock, seat adjustment or window liftersystems as well as in small gears, rolling and plain bearings.Its neutral behavior towards car body paints was established in accordance with VW-TL 745, section 4.4.Klübersynth LR 44-21 is applied where steel or aluminum move against POM or PA.The components are protected against wear throughout their service life. The good adhesion of Klübersynth LR 44-21 is important in vertical adjustment.Technical specifications Article number 020270 Colour space beige Texture homogeneous Texture fibrous Lower service temperature -55 °C Upper service temperature 130 °C NLGI grade, DIN 51818 1 Density at 20 °C approx. 0.85 g/cm³ Drop point, DIN ISO 2176, IP 396 >= 220 °CFlow pressure of lubricating greases, DIN 51805, test temperature: -55 °C<= 1 400 mbarWorked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 24 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 4.6 mm²/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:1 week, distilled water<= 1 corrosion degreeMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopenedoriginal container, approx.36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com