Mobil SHC Gear 150 Synthetic high performance gear oil 20L

Exxon Mobil SHC™ Gear 150 are synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Size: 20 l canisterAlso available in: 208 l barrelApplicationsModern, highly loaded gearboxes used in the paper, steel, oil, textile, lumber and cement industries where gear protection and optimum oil life are required.Plastic extruder gearboxesMobil SHC Gear Series ISO VG 150, 220, 320, 460 and 680 are approved under General Electric’s (GE) gear oil specification D50E35 for use in off-highway vehicle motorized wheel gearbox applicationsSpecifications & ApprovalsFlenderGE OHV D50E35A/B/C/D/ESEW-EurodriveZF TE-ML 04HAGMA 9005-F16DIN 51517-3:2018-09ISO L-CKD (ISO 12925-1:2024)ISO L-CTPR (ISO 12925-1:2024)FeaturesSuperb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wearExcellent resistance to degradation at high temperaturesLow tractionHigh viscosity index equating to reduced viscosity change with temperatureExcellent resistance to rust and corrosion and very good demulsibilityExcellent shear stabilityResistence to filter plugging, even in the presence of waterExcellent seal compatibilityExcellent compatibility with common gearbox materials and with mineral-based gear oilsTechnical specifications Manufacture number 151651 Grade ISO 150 Copper Strip Corrosion, 24 h, 121 C, Rating, ASTM D130 1B Demulsibility, Total Free Water, for EP Oils, ml, ASTM D2711 88 Density @ 15.6 C, g/ml, ASTM D4052 0.86 Flash Point, Cleveland Open Cup, °C, ASTM D92 233 Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 22.2 Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 150 Pour Point, °C, ASTM D5950  -54 Rust Characteristics, Procedure B, ASTM D665 PASS Viscosity Index, ASTM D2270 176 Product Description Mobil SHC™ Gear SeriesMobil SHC™ Gear Series is a line of exceptional performance, synthetic industrial gear oils designed to provide outstanding protection of gears andbearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity.These scientifically engineered synthetic lubricants are formulated from synthetic base fluids that have exceptional oxidation and thermal properties andexcellent low temperature fluidity. The high viscosity index of these oils deliver less change in viscosity with changes in temperature, enabling wideroperating temperature range and improved low temperature startup. Mobil SHC Gear Series lubricants contain an advanced proprietary additive systemdesigned to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropittingfatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings.Mobil SHC Gear Series products offer outstanding rust and corrosion protection relative to conventional gear oils, even in the presence of seawatercontamination. They show no tendency to plug fine filters even when wet and have excellent compatibility with ferrous and non-ferrous metals even atelevated temperatures. Mobil SHC Gear Series also exhibit outstanding compatibility with elastomers in static seal tests. They have outstanding EPproperties that provide protection even under shock load conditions. The synthetic base stocks used in Mobil SHC Gear Series oils have inherently lowtraction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluidfriction produces lower operating temperatures and can help improve gear efficiency.Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especiallyrecommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It mayalso be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.Application NotesWhile Mobil SHC 600 Series are generally compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC 600 Series oils are compatible with most NBR, FKM and most other elastomeric seal materials that are used with mineral oils. There is the potential for substantial variations in the elastomers. For best results, consult your  equipment supplier, seal manufacturer, or your local company representative to verify compatibility. Information on product safety (Manufacturer, Contact)EXXONMOBIL CENTRAL EUROPE HOLDING GMBH, Ericusspitze 2, 20457 Hamburg, GERMANY, +49 40 6393 0, , www.exxonmobil.de