Tempil Bloxide Weldable primer Aerosol can 341g

Bloxide®is a versatile, rust-preventive, weldable primer with a unique formula that can be applied to a wide range of metals, preventing the formation of rust and corrosion during extended periods of storage. Bloxide eliminates the need to clean metal surfaces before welding due to its enhanced corrosion preventative features, thus saving time and labor costs during fabrication. Bloxide is a completely weldable primer, also improving the weld quality after application, resulting in X-Ray quality welds.Ideal for extended periods of outside steel storageAbility to strike welding arc without removalTemperature resistant to 800°F (427°C)Aluminized finishDry time is 6 hours for around 77°F and 50% relative humidity/tack free  conditionsRecommended film thickness:  wet 3.0 mil, dry 0.75 milStandard packaging: 12oz aerosol (about 35cl)Can be sprayed, brushed or parts can be dipped into itQuick application and accurate results:Simply apply Bloxide by brush, dip or spray with no special equipment or training.Coverage is up to approximately 800 square feet per gallon.Industry-safe and free from lead, sulfur, zinc and other halogens, Bloxide is an excellent primer for a wide range of applications.Applications:Marine and offshore fabrication, almost all steels, primer for paints and coatings, and many more uses.Hazard Warnings (CLP)Signal word: DangerHazard Statements (H-phrases)H226: Flammable liquid and vapour.H304: May be fatal if swallowed and enters airways.H315: Causes skin irritation.H317: May cause an allergic skin reaction.H319: Causes serious eye irritation.H332: Harmful if inhaled.H350: May cause cancer.H361: Suspected of damaging fertility or the unborn child.H372: Causes damage to organs through prolonged or repeated exposure.H412: Harmful to aquatic life with long-lasting effects.Safety Statements (P-phrases)Prevention:P201: Obtain special instructions before use.P202: Do not handle until all safety precautions have been read and understood.P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P233: Keep container tightly closed.P240: Ground/bond container and receiving equipment.P241: Use explosion-proof electrical/ventilating/lighting equipment.P260: Do not breathe mist, vapours or spray.P264: Wash hands thoroughly after handling.P270: Do not eat, drink or smoke when using this product.P271: Use only outdoors or in a well-ventilated area.P272: Contaminated work clothing should not be allowed out of the workplace.P273: Avoid release to the environment.P280: Wear protective gloves, protective clothing, and eye protection.Response:P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor/…P302+P352: IF ON SKIN: Wash with plenty of water/…P303+P361+P353: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P308+P313: IF exposed or concerned: Get medical advice/attention.P312: Call a POISON CENTER/doctor/…/ if you feel unwell.P321: Specific treatment (see first aid instructions on the label).P331: Do NOT induce vomiting.P332+P313: If skin irritation occurs: Get medical advice/attention.P333+P313: If skin irritation or rash occurs: Get medical advice/attention.P337+P313: If eye irritation persists: Get medical advice/attention.P362+P364: Take off contaminated clothing and wash it before reuse.P370+P378: In case of fire: Use CO2, foam, or dry chemical powder for extinction.Storage:P403+P235: Store in a well-ventilated place. Keep cool.P405: Store locked up.Disposal:P501: Dispose of contents/container to a hazardous waste collection point in accordance with local/regional/national/international regulations.Other HazardsPBT: not relevant – no registration required.vPvB: not relevant – no registration required.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)LA-CO Industries Europe S.A.S., 465 All. des Combes, 01150 Blyes, FRANCE, +33 4 74 46 23 23, . www.lacoindustries.com