WD-40 Specialist Multi-Purpose Cutting Oil 400ml Smart Straw spray

WD-40 Specialist® 400ml Multi-Purpose Cutting OilMulti-Purpose Cutting Oil is designed to improve the performance and extend the life of your cutting and drilling equipment. You can use it on either stainless steel or titanium components.It prevents pitting and metal seizures, eases mechanical processing of metals, and reduces heat and damage caused by friction. CharacteristicsSpecially formulated to maximise the life of cutting and drilling equipmentLubricates to reduce tip weldingWorks under extreme pressureImproves machine finishesPrevents pitting and metal seizuresImproves performance and extends the life of toolsField of applicationHand cutting machineryPower cutting equipmentHand drillingThread cuttingPower drillsAdvantagesWith the Smart Straw applicator, you’ve got two ways to spray; use the flip up straw for hard to reach areas, such as inside chains, locks or rollers, then flip it down to use the wide angle spray eye for area coverage on surfaces. Whichever way you need to spray, you can rely on the clever 360° valve to work efficiently at every angle, even upside down.Technical specificationsAppearance: Brown liquidSpecific Gravity: 0.94 – 0.97 at 20°CFlammability, as supplied: Extremely flammable, flash point below -20°CComposition Data, as supplied: A solution of a naphthenic lubricant, chlorinated paraffin, anti-wear and extreme pressure additives in a butane/isobutane/propane propellantService Temperature [Continuous]: Designed for use at ambient temperaturesKinematic Viscosity at 40°C: 22 mm2/sActive Sulphur: 0.87 % (AS TM D-1662)4-ball Wear Test: 0.59 mm (AS TM D-4172) Hazard Warnings (CLP)Signal word: DangerHazard Statements (H-phrases)H362: May cause harm to breast-fed children.H222: Extremely flammable aerosol.H410: Very toxic to aquatic life with long-lasting effects.H229: Pressurised container: May burst if heated.Safety Statements (P-phrases)Prevention:P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P201: Obtain special instructions before use.P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P260: Do not breathe vapour or aerosol.P263: Avoid contact during pregnancy and while nursing.P270: Do not eat, drink or smoke when using this product.P273: Avoid release to the environment.Response:P308+P313: IF exposed or concerned: Get medical advice/attention.Storage:P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.Disposal:P501: Dispose of contents/container to an approved waste disposal facility.Additional Labelling (EUH-phrases)EUH066: Repeated exposure may cause skin dryness or cracking.Other HazardsFormation of explosive mixtures possible without adequate ventilation.The mixture contains a vPvB substance (very persistent, very bioaccumulative).The mixture contains a PBT substance (persistent, bioaccumulative, toxic).The mixture contains no substances with endocrine-disrupting properties (< 0.1%).×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, , www.wd40.de