3M 6099 Gas, Vapour and Particulate Filter ABEK2HgP3 R + Formaldehyde

3M® 6099 A2B2E2K2HgP3 R + Formaldehyde combination filter is a powerful gas and particulate filter for 3M full-face respirators with a bayonet click connection.Protection AgainstA2: Organic gases and vapors (boiling point > 65 °C)B2: Inorganic gases and vaporsE2: Acid gases and vaporsK2: Ammonia and derivativesHg: Mercury vaporFormaldehyde: Effective protection against formaldehydeP3: Solid and liquid particles, including hazardous dust, smoke and aerosolsFeaturesBayonet click connection for secure and easy filter installationSpecial filter for highly toxic substances such as mercury and formaldehydeEfficient filtration using activated carbon bonded fabric and high-performance particle filtersOnly compatible with 3M full-face respirators of the and 7907SIdeal for chemical industry, laboratories, waste treatment and hazardous environmentsNote: Due to its weight of approx. 340 g, this filter is not suitable for half masks.Technical DataFilter TypeA2B2E2K2HgP3 R + FormaldehydeWeightApprox. 340 g (per pair)ConnectionBayonet click connection for 3M full-face masksStandardsPersonal Protective Equipment (PPE) Category IIIEN 14387:2004+A1:2008 – Gas and combination filterEN 143:2000+A1:2006 – Particle filterMaterialsFilter media: Activated carbon bonded fabric, filter paperHousing: Polypropylene, polystyreneStorage and PackagingShelf life: 5 years from manufacturing date (if unopened and properly stored)Replace no later than 6 months after openingStorage temperature: -20 °C to +25 °C (temporarily up to +38 °C allowed)Maximum relative humidity: < 80%Packaging: Packed in pairs, 2 pairs per box (4 pieces), 8 boxes per carton (16 pairs = 32 pieces)Overview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3*For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)A*Organic vapours (boiling point > 65 °C)General protection against solventsA1*Like A, with lower capacityWater-based paints, paints with residual solventsA2*Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesB*Inorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideE*Acid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsK*Ammonia and derivativesFertilizers, slurry, laboratory processesHg*Mercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in accordance with applicable regulations and standards. Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds